Description
| Technical data | |
|---|---|
| Side length l | 9.7 mm |
| Insert thickness s | 3.97 mm |
| Hole diameter d1 | 4.4 mm |
| Corner radius rε | 0.4 mm |
| ANSI code | CCMT 32.51 |

finishing and semi-finishing — ISO groups P and M
| Material | Finishing | Semi-finishing | ||||
|---|---|---|---|---|---|---|
| Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | |
| PSteel | 180-300 | 0.05-0.2 | 0.1-1.65 | 180-300 | 0.12-0.21 | 0.5-3 |
| MStainless steel | 90-150 | 0.05-0.2 | 0.1-1.65 | 90-150 | 0.12-0.21 | 0.5-3 |
single-sided 80° diamond with a hole and chip breaker
The CCMT 09T304 turning insert is a single-sided, rhombic indexable insert made of grade H6310 cemented carbide, designed for turning steel and stainless steel. The C shape, a rhombus with a corner angle of 80°, combines cutting edge strength with good access to contours during longitudinal turning and facing. Positive geometry with a 7° clearance angle reduces cutting forces, allowing smooth cutting on slender shafts and thin-walled bushings. The rhombic shape provides two working corners on one side, giving two cutting edges. The nose radius rε of 0.4 mm favors precision machining and semi-finishing at low feed rates.
The CCMT 09T304 insert, also written without spaces as ccmt09t304, performs well in finishing and semi-finish turning of shafts, bushings, and flanges made of structural steels, as well as stainless steel components. Calculate spindle speed using n = 1000·Vc/(π·D): for a shaft diameter of 40 mm at Vc = 200 m/min, the result is approximately 1592 rpm. For stainless steels, maintain a cutting speed of 90–150 m/min and a constant feed rate to limit work hardening of the layer being cut and remove heat from the edge. The countersunk hole secures the insert with a clamping screw, while the single-sided chip breaker controls chip flow and breaking. Grade H6310 indexable inserts are supplied by the Korean brand Horn.
The small nose radius of 0.4 mm reduces radial force and improves surface finish, so select a feed rate below the radius value, preferably in the range of 0.05–0.2 mm/rev for precision machining. The positive, single-sided design places less load on the spindle than negative inserts, making it a good choice for light-duty lathes and finishing operations on CNC machines. PVD-coated grade H6310 covers ISO groups P20–P40 and M20–M40, and also performs well in occasional cast iron applications. For roughing or larger machining allowances, choose a version from the CCMT 09T3 family with a larger nose radius that better withstands cutting edge loads.
Grade H6310 is not intended for steels hardened above 45 HRC — for hard turning, select the version CCMT with a cubic boron nitride (CBN) cutting edge.
how to read the CCMT 09T304 code — positions 1–7 of the designation
Designation CCMT 09T304 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
ISO 1832 designation decoder — how to read the code
Positions 1–4 · ISO code
1CShape
80° rhombus
2 corners of 80° per side
2CClearance angle
α = 7°
positive, single-sided
3MTolerance
Class M (intermediate)
IC ±0.05 · thickness ±0.13 mm
4TType
Countersunk hole + chip breaker
countersink 40–60°, single-sided chip breaker
Positions 5–7 · dimensions [mm]
509Size
l = 9.7 mm
IC = 9.525 mm · 3/8″
6T3Thickness
s = 3.97 mm
between rake faces
704Corner radius
rε = 0.4 mm
code ÷ 10 → radius in mm
✓ 2 corners × 1 side = 2 cutting edges
holders with a size 09 diamond-shaped C pocket — external and internal turning
use, turning tool selection, and turning parameters
Two — the 80° diamond has 2 corners for cutting, and the positive, single-sided geometry (7° clearance angle) allows only one side of the insert to be used. Once both corners are worn, replace the insert with a new one.
Holders with a size 09 C-shaped rhombic insert pocket and screw clamping (IC 9.525 mm): for external turning SCLCR/L, SCMCN and SCACR/L with cross sections of 12×12–25×25 mm; for internal turning, boring bars S12K–S32T with the suffix SCLCR/L or SCFCR/L.
Only in corner radius: 0.4 mm in 09T304 is used for finishing and precision turning at low feed rates, while 0.8 mm in 09T308 is a more versatile option that withstands higher feed rates. The remaining dimensions (IC 9.525 mm, thickness 3.97 mm) are identical.
Yes — grade H6310 covers group ISO M20-M40. Maintain a cutting speed of 90–150 m/min, a constant feed rate, and continuous cooling, as austenitic steel conducts heat poorly and work-hardens when cutting too slowly.
Reference: 0000003710 In stock > 10 items
€4.69 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.