Description
| Technical data | |
|---|---|
| Side length l | 11 mm |
| Insert thickness s | 3.18 mm |
| Corner radius rε | 0.4 mm |
| ANSI code | TPUN 221 |

finishing, semi-finishing and roughing — ISO P and M groups
| Material | Finishing | Semi-finishing | Roughing | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | |
| PSteel | 200-295 | 0.1 | 1 | 170-240 | 0.15 | 2 | 150-215 | 0.3 | 3 |
| MStainless steel | 110-230 | 0.1 | 1 | 70-175 | 0.15 | 2 | 50-135 | 0.3 | 3 |
single-sided 60° triangle, positive geometry, without a hole or chip breaker
The TPUN 110304 turning insert is a single-sided, triangular indexable insert made of HTC grade cemented carbide, designed for turning steel and cast steel. The T shape, an equilateral triangle with a 60° corner angle, facilitates access to the workpiece contour during longitudinal turning and facing. Positive geometry with a 11° clearance angle reduces cutting forces and power consumption, allowing the insert to run smoothly at medium and low speeds. The design without a hole or chip breaker (type N according to ISO 1832) is secured with a top clamp, and the triangle provides three corners, or three cutting edges.
HTC is a cemented carbide grade in the ISO P25-P35 group, developed for semi-finishing and roughing steel and cast steel. It handles large uncut chip cross sections and difficult conditions where edge resistance to impact loads is essential. Indexable inserts in this grade resist abrasive wear at elevated cutting temperatures, extending cutting edge life. These are typical inserts for turning tools in one-off and series production. The grade also performs well when turning forgings and steel castings with uneven machining allowances, where the edge encounters varying depths of cut.
The TPUN 110304 insert (also written without a space as tpun110304) performs well when turning shafts, bushings, and flanges made of structural steels, as well as cast steel components. Calculate spindle speed using n = 1000·Vc/(π·D): for a shaft with a diameter of 40 mm at Vc = 200 m/min, the result is approximately 1592 rpm. For stainless steel, maintain a cutting speed of 50–230 m/min and a constant feed rate to limit work hardening of the layer being cut. For structural steels, start at the lower feed rates and increase the feed after checking for proper chip breaking. HTC grade turning inserts are supplied by the Korean brand Horn, offered in our range as the store's private label.
The TPUN insert has tolerance class U (wide) and has no chip breaker — it is intended for roughing and semi-finishing, rather than precision finishing to final dimensions. For turning steels hardened above 45 HRC choose a cubic boron nitride (CBN) insert.
how to read the TPUN 110304 code — designation positions 1–7
Designation TPUN 110304 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
ISO 1832 designation decoder — how to read the code
Positions 1–4 · ISO code
1TShape
60° triangle
3 corners of 60° per side
2PClearance angle
α = 11°
positive, single-sided
3UTolerance
Class U (wide)
IC ±0.08–0.25 · thickness ±0.13 mm
4NType
Without hole or chip breaker
top-clamp mounting
Positions 5–7 · dimensions [mm]
511Size
l = 11 mm
IC = 6.35 mm · 1/4″
603Thickness
s = 3.18 mm
between rake faces
704Corner radius
rε = 0.4 mm
code ÷ 10 → radius in mm
✓ 3 corners × 1 side = 3 cutting edges
number of edges, HTC grade, and turning parameters
Three — the triangle has 3 corners, and the positive geometry (letter P, 11° clearance angle) makes the insert single-sided, with only one working face. When a corner becomes dull, rotate the insert in its pocket to the next edge.
HTC is a cemented carbide grade in the group ISO P25-P35, designed for semi-finishing and roughing steel and cast steel. It handles large uncut chip cross sections and medium and low cutting speeds under difficult operating conditions.
The fourth letter N according to ISO 1832 indicates an insert without a hole or chip breaker. It is secured with a top clamp (clamping arm), and chip flow and breaking are controlled by selecting the feed rate and holder geometry, since the insert has no chip groove of its own.
Yes — HTC grade also covers the group ISO M (stainless steel). Maintain a cutting speed of 50–230 m/min, a constant feed, and continuous cooling: austenitic steel dissipates heat poorly and work-hardens when cutting is too slow.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.