- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Material HSS
Thread size M52
ChamferC (2–3) threads
Standard DIN 376
Technical data for the universal M52 HSS INOX machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M52 |
| Thread Pitch P | 5 mm |
| Overall Length l1 | 250 mm |
| Flute Length l2 | 70 mm |
| Shank Diameter d2 | 40 mm |
| Square Drive Size a | 32 mm |
| Tap Drill Diameter | 47 mm |
| Chamfer | C (2÷3) P |
| Thread tolerance | 6H |
Where chips remain in a straight-flute tap
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. There is no helix to carry chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute, next to the cutting edges that produced them. They leave the hole only when the tap is backed out. The M52 x5 tap has a reduced shank to DIN 376: diameter 40 mm, square size 32 mm.
1
Straight flute – chips remain in the flute, next to the cutting edges that produced them.
2
Chamfer C: 2–3 incomplete threads on the tapered lead.
3
The tap rotates clockwise to cut a right-hand thread.
4
Individual fragments exit at the top, onto the workpiece surface.
5
A few fragments fall below the tip and exit through the bottom of the hole.
6
Feed 5 mm/rev, equal to the pitch of the M52 x5 thread.
M52 HSS machine tap – a general-purpose tool for CNC machining
The M52 HSS machine tap with a long shank to DIN 376 is designed for precision tapping of holes with a diameter of 52 mm and a coarse pitch of 5 mm in structural steels and cast iron. Its HSS high-speed steel construction guarantees a hardness of 64 HRC and an economical price while maintaining high quality for machining standard materials. Form C with straight flutes provides versatile use in through holes and blind holes. The 6H tolerance in accordance with DIN 376 confirms the high manufacturing quality. The M52 HSS machine tap is intended for workshops and maintenance departments.
Key features of the M52 HSS tap for through holes and blind holes
- Long shank to DIN 376 provides increased clamping rigidity and eliminates vibration at the high cutting torques typical of the largest diameters
- Economical HSS steel with a hardness of 64 HRC provides an optimal solution for machining structural steels and cast iron in one-off and small-batch production
- Material versatility covering structural steels up to 800 MPa, GG25 gray cast iron, GGG40 ductile cast iron, and aluminum and brass alloys
- Precision to tolerance class 6H for demanding fit tolerances in the production of mechanical and structural components with standard accuracy
- Compliance with DIN 376 ensures standardized long shank dimensions and interchangeability with tools from European manufacturers
- M52 HSS machine tap with form C allows tapping of through holes and blind holes without changing the tool or parameters
The M52 general-purpose machine tap is used in maintenance, machine reconditioning, and one-off production of steel components. The M52 HSS machine tap is not recommended for stainless or hardened steels. The tap drill diameter for the M52 thread is 47 mm for a coarse thread with a pitch of 5 mm.
Cutting data for the universal M52 HSS INOX machine tap
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 31-122 | 155-610 |
| MStainless steel / INOX | 5-10 | 31-61 | 155-305 |
| KCast iron | 5-15 | 31-92 | 155-460 |
| NAluminum | 10-25 | 61-153 | 305-765 |
Thread preparation M52
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 47 mm
3 Tapping
M52
✓ Done!
Tolerance 6H
Standard: DIN 376 | Chamfer: C (straight) | Application: general-purpose (through and blind holes)
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
The M52 HSS tap is suitable for structural steels up to 800 MPa, gray and ductile cast iron, and aluminum alloys and brass. It is not recommended for stainless steels or steels hardened above 45 HRC.
The nominal tap drill diameter for the M52 thread is 47 mm. The hole tolerance zone should be within the range of 46.9–47.1 mm. A hole at the lower tolerance limit produces a fuller thread profile, while a hole at the upper limit reduces tapping torque.
The M52 tap works with ER40 holders and tapping chucks with axial compensation. Synchronized heads with automatic tool change capability are recommended for CNC machines.
Product accessories
Metal drill bit 47 NWKc HSS DIN 345 Baildon
Reference: 0441 In stock < 10 items
€110.53
€135.95 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.