Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical specifications of the M42x4 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M42 |
| Thread pitch P mm | 4 mm |
| Overall length l1 | 170 mm |
| Length of working part l2 | 60 mm |
| Diameter of shank part d2 | 28 mm |
| Size of square drive a | 22,4 mm |
| Threaded bore diameter | 38 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M42x4 fine pitch hand taps
Hand Tap M42X4 DIN 2181/2 6H HSS allows you to produce a metric M42 fine-coil thread with a pitch of four millimeters in steels with strengths up to eight hundred mega pascals; the two-part configuration - introduction and finishing - compensates for torsional loads and promotes the maintenance of a six H class hole fit.
Technical specifications: nominal diameter forty-two millimeters; stroke four millimeters; sixty-degree outline according to ISO 68-1; internal tolerances according to ISO 965 (bore class 6H); right-hand design; straight chip grooves directing the chip out of the cutting zone. High-speed steel in precision grind reduces micro chipping and maintains low micro edge roughness. A DIN 2181/2-compliant two-part layout - introduction I and finishing II - distributes torsional torque and promotes alignment; recommended drill bit for thread: thirty-eight millimeters. In the organization of the station, the order of the transitions is facilitated by Set Taps Manual M42x4 with unambiguous marking of the members.
- Smooth profile forming - stage I prepares the outline, stage II closes the geometry, reducing torque pulsations and chafing.
- High edge life - ground high-speed steel slows abrasion and sticking, extending sharpening intervals.
- Accuracy in the 6H field - Effective diameter control promotes positive pass/fail results.
- Standardization of the course - The M42x4 Hand Tapping Set streamlines the selection of members and standardizes inspection operations.
Meeting the requirements of DIN 2181/2 (execution), ISO 68-1 (outline geometry) and ISO 965 (class six H) guarantees compatibility with measuring equipment, ensures predictable outline profile and dimensional consistency in unit and short-run machining.
M42x4 thread cutting stages in a two-piece set: ripper and finisher
Frequently asked questions
1. What does set Taps of M42x4 manual thread cutters include?
The set consists of two thread cutters - a ripper and a finisher, which, when used consecutively, guarantee full thread formation.
2. For what materials is the M42x4 tapping tool designed?
The HSS tool works well for low-carbon steel, aluminum, brass and other materials with good machinability.
3. What are the advantages of being made of HSS?
HSS high-speed steel provides high durability, wear resistance and stable operation even in demanding conditions.
Product accessories
Countersink 45/90 DIN 335 C HSS cone countersink
Reference: 0000009863
€38.16
€46.93 brutto
Out of stock
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
