Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of the M45x2 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M 45 |
| Thread pitch P mm | 2 mm |
| Overall length l1 | 183 mm |
| Length of working part l2 | 67 mm |
| Diameter of the shank part d2 | 31,5 mm |
| Size of square drive a | 24.6 mm |
| Threaded bore diameter | 43 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M45x2 fine thread hand taps
Hand Tap M45X2 ISO 529/2 6H HSS performs M45 fine-coil internal metric threads with a pitch of two millimeters in structural steels up to eight hundred mega pascals. The smooth running and maintenance of the six H class fit is ensured by a two-pass system guided without load jumps.
Parameters: nominal diameter forty-five millimeters; stroke two millimeters; sixty-degree outline according to ISO 68-1; bore tolerance field class 6H according to ISO 965; right-hand design; straight chip grooves for uniform evacuation. Ground high-speed steel maintains low micro roughness and reduces micro chipping. According to ISO 529/2, the course is divided into an introductory I and a finishing II member; in workshop practice, the order of selection and rotation is facilitated by the M45x2 Hand Tapping Set. Recommended drill bit for the thread: forty-three millimeters; lubrication with emulsion or active oil improves the finish of the bottom of the coil.
- Uniform profile shaping - Stage I prepares the geometry, and Stage II closes the outline, reducing torsional vibration and chafing.
- Process order - Set Taps Manual M45x2 with clear member labeling unifies the sequence of operations and speeds up control.
- Longer sharpening intervals - precision grinding of high-speed steel slows abrasion and reduces sticking.
- Dimension in the 6H field - controlled effective diameter promotes positive "pass/fail" verification.
Maintaining the requirements of ISO 529/2 (workmanship), ISO 68-1 (outline geometry), and ISO 965 (tolerances for class six H) ensures compliance with inspection instruments, so Hand Tap M45X2 provides a stable profile and repeatable dimensions in unit and short-run productions.
M45x2 thread cutting stages in a 2-piece set: ripper and finisher
Frequently asked questions
1. What does the M45x2 set contain ?
The set consists of two thread cutters - a nipper and a finisher, which, when used in succession, guarantee full thread formation.
2. Is the M45x2 threader suitable for blind holes?
Yes, the set can be used for both through-holes and blind holes.
3. What materials is the M45x2 tapping tool designed for ?
The HSS tool works well for low-carbon steel, aluminum, brass and other materials with good machinability.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
