Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of the M20x2 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M20 |
| Thread pitch P mm | 2 mm |
| Overall length l1 | 80 mm |
| Length of working part l2 | 22 mm |
| Diameter of shank part d2 | 16 mm |
| Size of square drive a | 12 mm |
| Threaded bore diameter | 18 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M20x2 fine thread hand taps 2 pieces
Hand Tap M20X2 DIN 2181/2 6H HSS designed for manual cutting of metric fine threads in structural steels and cast iron; in workshop practice, hand Tap M20x2 maintains a 60-degree profile and a repeatable 6H grade hole fit.
Design profile and dimensioning: M20, pitch P=2; right-hand direction; HSS high speed steel in Fanar design, ground finish; straight grooves for controlled chip formation and evacuation; cylindrical shank with square drive; 18.0 mm drill recommended, which promotes proper profile filling and axial guidance in the hand cycle.
- Process organization - A set of M20x2 hand taps shortens the transition from chipping to finishing without compromising alignment.
- Fitting accuracy - Class 6H interacts with 6g male threads to maintain nominal clearance and a clean joint outline.
- Load control - Graduated nut and mild chamfer stabilize the input, limiting torsional torque on the cutting edge.
- Surface quality - Ground micro-geometry and straight grooves reduce burrs and promote low coil roughness.
Set Taps M20X2 DIN 2181/2 6H HSShandhelds provide predictable coil geometry and dimensional repeatability in unit machining and precision assembly. Standards and tolerances: design according to DIN 2181/2; metric 60-degree outline according to ISO 68-1; series and pitch according to ISO 261/262; ISO 965 tolerances (6H bore).
M20x2 thread cutting stages in 2-piece set: ripper and finisher
Frequently asked questions
1. Is the M20x2 DIN 2181 thread cutter suitable for blind holes?
Yes, the set can be used for both through-holes and blind holes, according to DIN 2181 and class 6H.
2. What materials is the M20x2 tapping tool designed for?
The HSS tool works well for low-carbon steel, aluminum, brass and other materials with good machinability.
3. What are the advantages of being made of HSS?
HSS high-speed steel provides high durability, wear resistance and stable operation even in demanding conditions.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
