Description
| Technical data | |
|---|---|
| Side length l | 11.6 mm |
| Insert thickness s | 3.97 mm |
| Hole diameter d1 | 4.4 mm |
| Corner radius rε | 0.4 mm |
| ANSI code | DCMT 32.51 |

finishing, semi-finishing and roughing — ISO P and M groups
| Material | Finishing | Semi-finishing | Roughing | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | |
| PSteel | 120-225 | 0.04 | 0.08 | 105-220 | 0.08 | 0.35 | 100-200 | 0.15 | 2 |
| MStainless steel | 124-216 | 0.04 | 0.08 | 120-210 | 0.08 | 0.35 | 110-210 | 0.15 | 2 |
single-sided 55° diamond with a hole, countersink and chip breaker
The DCMT 11T304 turning insert is a single-sided, diamond-shaped indexable insert made of H6310 grade cemented carbide, designed for turning steel and stainless steel. The D shape, a diamond with a 55° included angle, facilitates machining of contours and undercuts during longitudinal and copy turning. Positive geometry with a 7° clearance angle (letter C) reduces cutting resistance and promotes light, precise machining. The insert uses one side — two sharp 55° corners. The nose radius rε 0.4 mm provides a smooth surface at low feed rates, while the hole with a countersink and single-sided chip breaker (type T according to ISO 1832) controls chip flow and breaking. The PVD coating improves edge resistance to abrasive wear and rising temperatures in the cutting zone. Low cutting forces make this insert a good choice for less rigid lathes and slender, thin-walled workpieces prone to deformation and vibration.
The DCMT 11T304 insert (also written without spaces as dcmt11t304) is suitable for finishing shafts, bushings, and contoured parts made of structural steels, as well as stainless steel components. As a cutting insert for indexable turning tools, it is suitable for typical external and internal turning operations. Calculate spindle speed using n = 1000·Vc/(π·D): for a shaft with a diameter of 30 mm at Vc = 200 m/min, the result is approximately 2122 rpm. For a smaller diameter of 16 mm at the same cutting speed, the result is approximately 3979 rpm, so adjust spindle speed to the current workpiece diameter. For stainless steels, maintain a cutting speed of 124–216 m/min and a constant feed to minimize work hardening of the material being cut. Keep the depth of cut within the finishing and semi-finishing range, and control chip flow with a continuous coolant supply. These indexable inserts in grade H6310 are supplied by the Korean brand Horn.
The positive, single-sided DCMT insert with rε 0.4 mm is selected for finishing and semi-finishing — not for heavy roughing or turning hardened steels above 45 HRC. For hard turning, choose a version with a cubic boron nitride (CBN) cutting edge.
how to read the DCMT 11T304 code — designation positions 1–7
Designation DCMT 11T304 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
holders with a 11 diamond-shaped pocket — external and internal turning
use, turning tool selection, and turning parameters
Two — the 55° diamond has 2 acute corners, and the positive, single-sided geometry allows cutting only with the top side of the insert. Once one corner becomes dull, simply index the insert in its pocket to use the second cutting edge.
Holders with a 11 diamond-shaped pocket (IC 9.525 mm): for external turning SDHCR/L, SDJCR/L and SDNCN with cross sections of 12×12–32×32 mm; for internal turning, boring bars S16P–S40U with the suffix SDXCR/L, SDPCR/L, SD-CR/L, SDQCR/L, or SDUCR/L. The full list is available in the compatible turning tools section.
Only in corner radius: 0.4 mm (code 04) is used for finishing at low feeds and provides a smoother surface, while 0.8 mm (code 08) is a more versatile version with greater strength at higher feeds. The other dimensions (IC 9.525 mm, thickness 3.97 mm) are identical throughout the DCMT 11T3 family.
Yes — grade H6310 covers group ISO M20-M40. Maintain a cutting speed of 124–216 m/min, a constant feed, and continuous emulsion cooling: austenitic steel conducts heat poorly and work-hardens when cutting is too slow.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.