- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data for the G 1 1/4 inch tap
| Technical data | ||
|---|---|---|
| Nominal diameter d1 inches/mm | G 1.1/4 in | 41.91 mm |
| Thread pitch P inches/mm | 11 threads per inch | approximately 2.309 mm |
| Overall length l1 | 170 mm | |
| Flute length l2 | 30 mm | |
| Shank diameter d2 | 32 mm | |
| Square drive size a | 24 mm | |
| Tap drill diameter | 39.5 mm | |
| Chamfer | C (2÷3) P | |
| Thread angle G | 55° | |
| Thread standard | BSP DIN ISO 228 | |
Where chips remain in a straight-flute tap
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. It has no helix to carry chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute, next to the cutting edges that produced them. They leave the hole only with the tap as it is reversed out. The shank of the G 1.1/4 tap according to DIN 5156 has a diameter of 32 mm and a square size of 24 mm.
1
Straight flute – chips remain in the flute, next to the cutting edges that produced them.
2
Chamfer C: 2–3 incomplete threads on the tapered lead.
3
The tap rotates clockwise to cut a right-hand thread.
4
Individual fragments exit at the top, onto the workpiece surface.
5
A few fragments fall below the tip and exit through the bottom of the hole.
6
The G 1.1/4 thread has 11 threads per inch; the feed is approximately 2.309 mm/rev.
G 1 1/4 inch machine tap for stainless steel
Machine Tap G 1 1/4 DIN 5156 C HSSE Narex is a high-quality tap designed for cutting parallel pipe threads G1.1/4 inch in through holes. Made of durable cobalt-alloyed HSSE high-speed steel, it ensures long tool life, high wear resistance and reliable performance in steel, stainless steel and cast iron.
The tap is equipped with a form C chamfer (2–3 cutting threads), enabling a reliable, fast start to tapping. The product is manufactured in accordance with DIN 5156, ensuring dimensional compatibility with the G-type BSP pipe thread system and excellent thread quality.
G1.1/4 inch machine tap is used in hydraulic installations, piping systems and industrial applications where leak-tight connections, dimensional repeatability and compliance with ISO 228 are essential.
- HSSE steel – increased resistance to abrasion and thermal loads
- Form C chamfer – 2–3 cutting threads, designed for through holes
- Application – for structural steel, stainless steel and cast iron
- Manufactured in accordance with DIN 5156 – precise geometry and durability
- Designed for G (BSP) pipe connections in industrial applications
Frequently asked questions
The question “how many mm is G 1 1/4 inch” or “how many cm is G 1 1/4 inch” often arises when selecting pipe tapping tools. Contrary to what one might expect, the value 1 1/4 inch (equivalent to 41.91 mm or 4.19 cm) does not indicate the thread diameter, but the nominal size of the pipe that the thread fits. In practice, the 1 1/4 inch G tap has an outside diameter of 41.91 mm, because G (BSP) pipe threads are designed for thick-walled pipes.
For this reason, always check the thread diameter in the technical data instead of converting inches directly to millimeters. In the BSP system, thread size is determined by the design of the entire installation, not just the nominal dimension.
No. A G (BSP) thread is a parallel pipe thread, meaning its diameter is constant along its entire length. Unlike taper threads (designated R or BSPT), G threaded connections are not self-sealing. This means that a G thread does not provide a seal on its own – it requires an additional sealing element, e.g. a flat gasket, O-ring or plastic washer. This sealing method is commonly used in hydraulic, pneumatic and industrial installations.
Product accessories
Die 1 1/4 inch G HSS DIN EN 24231 Cztool
Reference: 245883 In stock < 10 items
€57.89
€71.21 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.