Description
| Technical data | ||
|---|---|---|
| Nominal diameter d1 inches/mm | G 1/4 inch left-hand | 13.157 mm |
| Thread pitch P inches/mm | 19 threads per inch | 1.33 mm |
| Overall length l1 | 70 mm | |
| Flute length l2 | 22 mm | |
| Shank diameter d2 | 11 mm | |
| Square drive size a | 9 mm | |
| Tap drill diameter | 11.8 mm | |
| Form C chamfer | No. 1: 5P, No. 2: 2P | |
| Thread angle G | 55° | |
| Thread standard | BSP DIN ISO 228 | |

Division of work in the 1–2 set
The G 1/4 LH thread is cut into the wall of a hole with a diameter of 11.8 mm. The thread groove extends 0.68 mm into the wall. A single tap would have to cut the entire groove at once – by hand, this means high resistance and a risk of breakage. The set divides this work into two passes.
The drawing shows the entire set in operation. Both taps have the same shank and the same length. They differ in their chamfer, the tapered tip: No. 1 has a chamfer spanning 5 threads, while No. 2 spans only 2 threads. The detail windows at the hole wall show how the thread groove deepens after each tap.
| Tap | Chamfer | Chamfer angle | Material removed | How it works in the hole |
|---|---|---|---|---|
| No. 1 – roughing tap | long, 5 threads | 7° | the main portion of the groove | enters smoothly and establishes thread alignment |
| No. 2 – finishing tap | short, 2 threads | 20° | the remainder, to the full profile | screws into the previously cut threads and produces the full thread profile |
The chamfer on No. 1 is 2.5 times as long as the chamfer on No. 2 – the difference is immediately visible when you place them side by side. No. 1 has an incomplete thread profile; only No. 2 has the full profile. The number is also indicated on the shank: No. 1 has one ring, No. 2 has none. Keep the set together and always start with the roughing tap.
Hand tapping step by step
Drill bit 11.8 mm
Chamfer 5 threads
Chamfer 2 threads
Thread G 1/4 LH
Turning sequence: half a turn counterclockwise, a quarter turn clockwise | Between taps: remove chips from the hole
Start with the hole. The G thread has a Whitworth profile, with a thread height of 0.64 times the pitch. The minor diameter of the internal thread is the 13.157 mm diameter minus twice the thread height, or 1.28 × the 1.337 mm pitch: the result is 11.445 mm. ISO 228-1 permits a hole diameter from 11.445 to 11.89 mm, and a 11.8 mm drill falls within this range. An undersized hole is a common cause of taps twisting off in the material.
The set taps both types of holes. In a through hole, the thread extends through the full material thickness. In a blind hole, cut the thread to match the thread length of the fitting being installed. Drill the hole deeper than the thread. The finishing tap has a 2-thread chamfer, so approximately 2 incomplete threads remain near the bottom. The extra depth below the thread accommodates these along with the chips.
Fit the roughing tap into a tap wrench and position it perpendicular to the surface. Check the angle from two sides, for example with a square. This is a left-hand thread, so turn in the opposite direction to usual: half a turn counterclockwise, then a quarter turn clockwise. Reversing breaks the chip into short pieces — a slight crunch is normal. The first threads determine whether the thread will be straight.
Back out the roughing tap and remove chips from the hole. Screw the finishing tap by hand into the previously cut threads – it should engage them naturally. Continue turning with the same rhythm used for the roughing tap. The finishing tap removes the remaining material and cuts the groove to its full profile. When it screws in smoothly all the way, the thread is finished – check it with a G 1/4 LH thread plug gauge: the GO end screws in by hand over the full length, while the NO-GO end enters no more than 2 threads.
Hand Tap 1/4 inch left-hand G DIN 5157/2 HSS is a precision 2-piece set (roughing tap + finishing tap), designed for hand cutting G parallel pipe threads (BSP – British Standard Pipe) o left-hand thread direction. The tool is made from durable high-speed steel HSS, which ensures long service life, abrasion resistance and precise machining.
The G 1/4 inch thread has an external diameter of 13.157 mm, in accordance with ISO 228-1, and a profile angle of 55°. Left-hand threads are used in technical systems where preventing the connection from loosening on its own is essential – for example, in gas or pneumatic installations or rotating components.
1/4 inch left-hand pipe tap compliant with DIN 5157/2 performs exceptionally well in precision maintenance and workshop applications, ensuring compliance with BSP standards and safe operation.
Hand Tap 1/4 inch left-hand G DIN 5157/2 HSS is a proven tool for professionals who need a durable and precise solution for cutting left-hand BSP threads in technical and industrial installations.

The question “how many mm is G 1/4 inch” or “how many cm is G 1/4 inch” often arises when selecting pipe tapping tools. Contrary to what one might expect, the value 1/4 inch (equivalent to 13.16 mm or 1.31 cm) does not indicate the thread diameter, but the nominal size of the pipe that the thread fits. In practice, the 1/4 inch G tap has an outside diameter of 13.16 mm, because G (BSP) pipe threads are designed for thick-walled pipes.
For this reason, always check the thread diameter in the technical data instead of converting inches directly to millimeters. In the BSP system, thread size is determined by the design of the entire installation, not just the nominal dimension.
No. A G (BSP) thread is a parallel pipe thread, meaning its diameter is constant along its entire length. Unlike taper threads (designated R or BSPT), G threaded connections are not self-sealing. This means that a G thread does not provide a seal on its own – it requires an additional sealing element, e.g. a flat gasket, O-ring or plastic washer. This sealing method is commonly used in hydraulic, pneumatic and industrial installations.
Reference: 0000003293 In stock < 10 items
€17.80 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.