• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Hand Tap M8 HSS - 2 piece Fanar
search
  • Hand Tap M8 HSS - 2 piece Fanar
  • Hand Tap M8 HSS - 2 piece Fanar - nr. 1
Fanar Narzędzia

Hand Tap M8 DIN 352/2 6H HSS Fanar

Fanar Narzędzia Fanar Narzędzia
0000009559
Thread size: M87 sizes of this tap
€9.71 tax inc.

Net price: €7.89

Instant Shipping
W magazynie: 6 pcs.
W magazynie: 6 pcs.

Instant Shipping

Call and order: (44) 755-04-05

Description

Material HSS
Thread size M8
Number of pieces2 pcs
Tolerance 6H ISO2

Technical data for the M8 hand tap

Technical data
Thread Diameter d1 M8
Thread Pitch P 1.25 mm
Overall Length l1 63 mm
Flute Length l2 20 mm
Shank Diameter d2 6 mm
Square Drive Width Across Flats a 4.9 mm
Tap Drill Hole 6.8 mm

Roughing tap and finishing tap – how much material each removes

Division of work in the 1–2 set

The M8 x1.25 thread is cut into the wall of a hole with a diameter of 6.8 mm. The thread groove extends 0.6 mm into the wall. A single tap would have to cut the entire groove at once – by hand, this creates high resistance and a risk of breakage. The set divides this work into two passes.

Tapping an M8 hole: 6.8 mm hole, tap No. 1 and No. 2 shown in a plate cross section
Tapping an M8 hole: 6.8 mm hole, tap No. 1 and No. 2 shown in a plate cross section

The drawing shows the entire set in operation. Both taps have the same shank and the same length. They differ in their chamfer, the tapered tip: No. 1 has a chamfer spanning 8 threads, while No. 2 spans only 2 threads. The detail windows at the hole wall show how the thread groove deepens after each tap.

TapChamferChamfer angleMaterial removedHow it works in the hole
No. 1 – roughing taplong, 8 threads5°the main portion of the grooveenters smoothly and establishes thread alignment
No. 2 – finishing tapshort, 2 threads20°the remainder, to the full profilefollows the cut threads and produces the full 6H profile

How to distinguish the taps in the set

The chamfer on No. 1 is 4 times as long as the chamfer on No. 2 — the difference is immediately visible when you place them side by side. No. 1 has an incomplete thread profile; only No. 2 has the full profile. The number is also indicated on the shank: No. 1 has one ring, No. 2 has none. Keep the set together and always start with the roughing tap.

How to tap an M8 hole – sequence 1, 2

Hand tapping step by step

Thread M8 x1.25 in four steps

ØDrilling

Drill bit 6.8 mm

1Roughing tap

Chamfer 8 threads

2Finishing tap

Chamfer 2 threads

✓Finished thread

Tolerance 6H

Turning sequence: half a turn clockwise, a quarter turn counterclockwise | Between taps: remove chips from the hole

Start with the hole. The drill diameter is easy to calculate: thread diameter 8 mm minus pitch 1.25 mm gives 6.75 mm — in practice, use a 6.8 mm drill bit. An undersized hole is a common cause of a tap twisting off in the workpiece.

Through hole or blind hole – how deep to drill

The set taps both types of holes. In a through hole, the thread extends through the full material thickness. In a blind hole, cut the thread to 20 mm, or 2.5 times the thread diameter (2.5 x 8 mm, shown as 2.5D in the drawing). Drill the hole deeper than the thread. The finishing tap has a chamfer spanning 2 threads, so approx. 2 incomplete threads remain near the bottom. The extra depth below the thread accommodates them along with the chips.

M8 thread in a through and blind hole – cross-sections with clearance for chips and the chamfer

No. 1 – the roughing tap establishes thread alignment

Fit the roughing tap in the tap wrench and position it perpendicular to the surface. Check the angle from two sides, for example with a square. Turn half a turn clockwise, then a quarter turn counterclockwise. Reversing breaks the chip into short pieces – a slight crunch is normal. The first threads determine whether the thread will be straight.

No. 2 – the finishing tap produces the full profile

Unscrew the roughing tap and remove the chips from the hole. Screw the finishing tap into the cut threads by hand – it should engage them naturally. Continue turning with the same rhythm used for the roughing tap. The finishing tap removes the remaining material and cuts the groove to the full profile in tolerance class 6H. When it screws in smoothly all the way, the thread is complete – check it with an M8 screw.

M8 HSS DIN 352 hand tap – 2-piece set for frequent tapping jobs

The M8 hand tap set is an economical set of two tools for cutting internal threads with a diameter of 8 mm and a pitch of 1.25 mm. The two-piece set of M8 HSS hand taps conforming to DIN 352 includes a roughing tap and a finishing tap for fast, efficient tapping. M8 is one of the basic sizes used in automotive applications, industrial electronics, and machine building.

Key advantages of the M8 tap set

  • 2-piece set (roughing and finishing taps) – speeds up tapping without compromising quality
  • Basic M8 size – widely used in automotive applications, electronics, and machinery
  • HSS high-speed steel – versatile machining of steel, aluminum, and brass up to 800 MPa
  • Tolerance 6H according to DIN 352 – precise fit with M8 screws of tolerance class 6g
  • Affordable price – an economical option for frequent tapping jobs

The M8 hand tap set is suitable for automotive service centers, machine shops, and assembly departments. To drill the hole for an M8 thread, use a drill bit with a diameter of 6.8 mm. The two-piece set is a practical solution for standard materials and typical applications.

Tolerance 6H — metric thread tolerance classes

ClassAccuracyApplicationStatus
4H / 4g High Precision connections, hydraulics —
6H / 6g Standard Machine building, general-purpose SELECTED
7H / 8g Low Large clearance, easy assembly —

6H = internal thread (nut, hole) | 6g = external thread (screw)

Frequently asked questions

For an M8 thread with a pitch of 1.25 mm, use a 6.8 mm drill bit. Calculation: 8 - 1.25 = 6.75 mm, rounded to 6.8 mm.

A 3-piece set or HSSE taps are better for stainless steel. Stainless steel requires cutting in stages.

Standard M8 has a pitch of 1.25 mm, while the M8x1 metric fine thread has a pitch of 1 mm. The metric fine thread requires a 7 mm drill bit and a separate tap set.

Product accessories

Tap wrench No. 3

Reference: 085009 In stock > 10 items

€13.16

€16.18 brutto

Reviews

No customer reviews for the moment.

Add a review about the product

Hand Tap M8 DIN 352/2 6H HSS Fanar

Hand Tap M8 DIN 352/2 6H HSS Fanar

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information