Description
| Technical data | |
|---|---|
| Side length l | 9.525 mm |
| Insert thickness s | 3.97 mm |
| Hole diameter d1 | 4.4 mm |
| Corner radius rε | 0.8 mm |
| ANSI code | SCMT 32.52 |

finishing and semi-finishing — ISO groups P and M
| Material | Finishing | Semi-finishing | ||||
|---|---|---|---|---|---|---|
| Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | |
| PSteel | 180-300 | 0.05-0.2 | 0.1-1.65 | 180-300 | 0.12-0.21 | 0.5-3 |
| MStainless steel | 90-150 | 0.05-0.2 | 0.1-1.65 | 90-150 | 0.12-0.21 | 0.5-3 |
single-sided 90° square with positive geometry and a chip breaker
The SCMT 09T308 turning insert is a single-sided, square indexable insert made of grade H6310 cemented carbide, designed for turning steel and stainless steel. Shape S, a square with a 90° corner angle, provides a strong, durable corner that withstands loads during longitudinal turning and facing. The positive geometry with a 7° clearance angle (letter C) reduces cutting forces, making the insert suitable for less rigid workpieces, boring, and smaller lathes. Four corners are usable on one side, providing four cutting edges. The rε 0.8 mm corner radius combines a good surface finish with edge strength at feed rates of 0.12–0.21 mm/rev.
The SCMT 09T308 insert (also written without spaces as scmt09t308) is suitable for turning shafts, bushings, and flanges made of structural steels, as well as stainless steel components. Calculate spindle speed using the formula n = 1000·Vc/(π·D): for a shaft diameter of 50 mm at Vc = 200 m/min, the result is approximately 1273 rpm. For stainless steels, maintain a cutting speed of 90–150 m/min and a constant feed rate to avoid work hardening of the layer being cut. The positive geometry and countersunk mounting hole facilitate chip evacuation during finishing and semi-finishing. Grade H6310 indexable inserts with a PVD coating are supplied by the Korean brand Horn.
Grade H6310 is a versatile carbide with a PVD coating, covering ISO groups P20-P40 and M20-M40. The coating increases resistance to wear and heat in the cutting zone, while the carbide substrate retains its resistance to impact loads. This allows one insert to cover unalloyed and alloy steels as well as more difficult-to-machine austenitic stainless steels. The SCMT insert is secured in the holder pocket with a central screw, allowing quick indexing after a corner wears out without changing the dimensional setting.
Grade H6310 is not intended for steels hardened above 45 HRC — for hard turning, choose an insert with a cubic boron nitride cutting edge CBN.
how to read the SCMT 09T308 code — positions 1–7 of the designation
Designation SCMT 09T308 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
ISO 1832 designation decoder — how to read the code
Positions 1–4 · ISO code
1SShape
Square 90°
4 corners of 90° per side
2CClearance angle
α = 7°
positive, single-sided
3MTolerance
Class M (intermediate)
IC ±0.05 · thickness ±0.13 mm
4TType
Countersunk hole + chip breaker
countersink 40–60°, single-sided chip breaker
Positions 5–7 · dimensions [mm]
509Size
l = 9.525 mm
IC = 9.525 mm · 3/8″
6T3Thickness
s = 3.97 mm
between rake faces
708Corner radius
rε = 0.8 mm
code ÷ 10 → radius in mm
✓ 4 corners × 1 side = 4 cutting edges
tool holders with a size 09 square pocket — external turning of steel and stainless steel
use, turning tool selection, and turning parameters
Four — a square has 4 corners, but the positive, single-sided geometry (7° clearance angle) allows only one side of the insert to be used. When a corner wears out, simply index the insert in its pocket without changing the holder.
Holders with a square 09 pocket (IC 9.525 mm) for external turning: neutral SSDCN and right-hand and left-hand SSSCR/L, with cross sections from 12×12 to 25×25 mm. The insert is secured in the pocket with a central screw.
Only in corner radius: 0.4 mm (code 04) is used for finishing at low feed rates, while 0.8 mm (code 08) is a general-purpose version with a stronger corner. The other dimensions — IC 9.525 mm and thickness 3.97 mm — remain identical.
Yes — grade H6310 covers group ISO M20-M40. Maintain a cutting speed of 90–150 m/min, a constant feed, and continuous cooling: austenitic steel dissipates heat poorly and work-hardens when cutting is too slow.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.