Net price: €5.26
Description
| Technical data | |
|---|---|
| Side length l | 8.7 mm |
| Insert thickness s | 4.76 mm |
| Hole diameter d1 | 5.16 mm |
| Corner radius rε | 1.2 mm |
| ANSI code | WNMG 433 |

finishing, semi-finishing and roughing — ISO P and M groups
| Material | Finishing | Semi-finishing | Roughing | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | |
| PSteel | 200-295 | 0.18 | 0.8 | 170-240 | 0.35 | 2.5 | 150-215 | 0.6 | 4 |
| MStainless steel | 110-230 | 0.18 | 0.8 | 70-175 | 0.35 | 2.5 | 50-135 | 0.6 | 4 |
double-sided 80° trigon with a hole and chip breaker
The WNMG 080412 turning insert is a double-sided, trigon indexable insert made of H6310 grade cemented carbide, designed for turning steel and stainless steel. Shape W, a trigon with a 80° corner angle, combines strength close to that of a square corner with better access to the workpiece contour than a square insert. Negative geometry with a 0° clearance angle allows both sides of the insert to be used — a total of six cutting edges. The large rε 1.2 mm nose radius strengthens the corner and supports roughing at feed rates up to 0.6 mm/rev. The hole and double-sided type G chip breaker per ISO 1832 control chip flow and breaking throughout the feed range.
H6310 is a versatile PVD-coated carbide grade covering ISO groups P20-P40 and M20-M40, namely structural and alloy steels and austenitic stainless steels; it is also suitable for occasional cast iron machining. A cemented carbide insert with this geometry is versatile: the 1.2 mm radius is suitable for medium machining and roughing, where edge resistance to loads and interrupted cutting matters. The same cutting insert can handle shafts, bushings, and flanges without switching to a smaller radius between operations.
The WNMG 080412 insert (also written without a space as wnmg080412) performs well in longitudinal turning and facing of structural steel and stainless steel components — these are typical turning inserts for series production. Calculate spindle speed using n = 1000·Vc/(π·D): for a shaft diameter of 50 mm at Vc = 200 m/min, the result is approximately 1273 rpm, and increasing the diameter to 80 mm gives approximately 796 rpm. For stainless steels, maintain a cutting speed of 50–230 m/min and a constant feed to prevent work hardening of the layer being cut. Grade H6310 indexable inserts are supplied by the Korean brand Horn.
Grade H6310 is not intended for steels hardened above 45 HRC — for hard turning, select the version WNMG 080412 with a cubic boron nitride (CBN) edge, intended for turning inserts for hardened steel.
how to read the WNMG 080412 code — positions 1–7 of the designation
Designation WNMG 080412 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
ISO 1832 designation decoder — how to read the code
Positions 1–4 · ISO code
1WShape
80° trigon
3 corners of 80° per side
2NClearance angle
α = 0°
negative, double-sided
3MTolerance
Class M (intermediate)
IC ±0.08 · thickness ±0.13 mm
4GType
Hole + chip breaker
chip breaker on both sides
Positions 5–7 · dimensions [mm]
508Size
l = 8.7 mm
IC = 12.7 mm · 1/2″
604Thickness
s = 4.76 mm
between rake faces
712Corner radius
rε = 1.2 mm
code ÷ 10 → radius in mm
✓ 3 corners × 2 sides = 6 cutting edges
holders with a 08 trigon pocket — external and internal turning
use, turning tool selection, and turning parameters
Six — the trigon has 3 corners per side, and the negative geometry (0° clearance angle) allows both sides of the insert to be used. Once an edge becomes dull, simply rotate the insert in its pocket without changing the holder.
Holders with a size 08 trigon pocket (IC 12.7 mm): for external turning TWLNR/L, PWLNR/L and MWLNR/L (entering angle 95°) and MWDNN (50°) with shank cross sections of 20×20–40×40 mm; for internal turning, boring bars S25S–S50V with the suffix TWLNR/L, PWLNR/L, or MWLNR/L.
Only in corner radius: 0.4 mm is used for finishing at low feed rates, 0.8 mm is the general-purpose version, and 1.2 mm is selected for roughing at feed rates up to 0.6 mm/rev. The remaining dimensions (IC 12.7 mm, thickness 4.76 mm) are identical.
Yes — grade H6310 covers group ISO M20-M40. Maintain a cutting speed of 50–230 m/min, a constant feed, and continuous emulsion cooling: austenitic steel conducts heat poorly and work-hardens when cutting is too slow.
Reference: 0000004240 In stock > 10 items
€6.47 brutto
Reference: 0000006088 In stock > 10 items
€6.47 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.