• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Carbide insert SNMG 120408 MA H6310 Horn - Turning inserts
search
  • Carbide insert SNMG 120408 MA H6310 Horn - Turning inserts
  • Carbide insert SNMG 120408 MA H6310 Horn - Turning inserts - nr. 1
Horn

Carbide insert SNMG 120412 H5115 Horn

Horn Horn
15224
Cutting edge length: 122 sizes of this insert
€8.09 tax inc.

Net price: €6.58

Instant Shipping
W magazynie: +100 szt.
W magazynie: +100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

SNMG 120412 turning insert – indexable 90° square

Technical data
Side length l 12.7 mm
Insert thickness s 4.76 mm
Hole diameter d1 5.16 mm
Corner radius rε 1.2 mm
ANSI code SNMG 433
SNMG 120412 indexable turning insert made of H5115 cemented carbide, double-sided square with a hole and chip breaker for cast iron

Cutting data for the SNMG insert for cast iron

finishing, semi-finishing, and roughing — ISO K group (cast iron)

MaterialFinishingSemi-finishingRoughing
Vc [m/min]Feed f [mm/rev]ap [mm]Vc [m/min]Feed f [mm/rev]ap [mm]Vc [m/min]Feed f [mm/rev]ap [mm]
KCast iron 180-300 0.1-0.2 0.5-2 120-180 0.2-0.4 1-4 100-150 0.3-0.6 2-6

H5115 carbide indexable insert – applications and construction

double-sided 90° square with a hole and chip breaker

The SNMG 120412 turning insert is a double-sided, square indexable insert made of grade H5115 cemented carbide, designed for turning and boring cast iron castings. Shape S, a square with a 90° corner angle, provides a short, rigid edge with high strength — it withstands interrupted cuts and the hard inclusions typical of castings. Negative geometry with a 0° clearance angle allows both sides of the insert to be used, providing a total of eight cutting edges. The corner radius rε of 1.2 mm strengthens the cutting tip and allows higher feeds during semi-finishing and roughing. The hole with a chip breaker on both sides (type G according to ISO 1832) secures the insert and controls chip flow.

Key advantages of the H5115 carbide insert

  • Eight cutting edges — 4 corners on each of the two sides reduce the cost per cutting edge compared with single-sided inserts.
  • Grade H5115 for cast iron (ISO K) — CVD coating for turning gray, ductile, and malleable cast iron at cutting speeds up to approximately 400 m/min.
  • Corner radius rε 1.2 mm — strong cutting edge for semi-finishing and roughing at higher feed rates and depths of cut.
  • The 90° corner of the square insert is robust and resistant to chipping, promoting stable machining with uneven casting allowances.
  • Tolerance class M, a hole, and a chip breaker on both sides ensure repeatable insert seating and chip control on both sides.
  • Dimensions conform to ISO 1832: side length 12.7 mm, IC 12.7 mm (1/2″), thickness 4.76 mm — compatible with holders with a 12 pocket.

Square insert applications and cutting data selection

The SNMG 120412 insert (also written without a space as snmg120412) is suitable for external turning and boring of bodies, pulleys, bushings, and housings made of gray, ductile, and malleable cast iron. The CVD coating on grade H5115 allows cutting speeds up to approximately 400 m/min, reducing machining time in series production. Calculate spindle speed using the formula n = 1000·Vc/(π·D): for a shaft diameter of 80 mm at a cutting speed Vc = 250 m/min, the result is approximately 995 rpm. When roughing castings, maintain a depth of cut of several millimeters and a constant feed rate to load the cutting edge evenly. Indexable inserts in grade H5115 are supplied by the Korean brand Horn.

The 90° corner of the square insert is more robust than the corner of rhombic inserts, so it dissipates heat more effectively and is less prone to chipping with uneven casting allowances. In practice, this means predictable tool life in series production, provided the machine tool is fully rigid and the clamping is securely tightened. To make full use of all eight cutting edges, index the insert in its pocket only after the corner has become noticeably dull, and use compressed air or dust extraction instead of emulsion when machining cast iron.

▲
Application limitation

Grade H5115 with a coating of CVD is optimized for cast iron (group ISO K). For turning structural steel or stainless steel, select an insert in a grade from group P or M — this coating performs differently on ductile materials than on cast iron.

Square insert designation decoder according to ISO 1832

how to read the SNMG 120412 code — designation positions 1–7

Designation SNMG 120412 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.

ISO 1832 designation decoder — how to read the code

1Sshape 2Nangle α 3Mtolerance 4Gtype – 512size 604thickness 712radius rε

Positions 1–4 · ISO code

1SShape

Square 90°

4 corners of 90° per side

2NClearance angle

α = 0°

negative, double-sided

3MTolerance

Class M (intermediate)

IC ±0.08 · thickness ±0.13 mm

4GType

Hole + chip breaker

chip breaker on both sides

Positions 5–7 · dimensions [mm]

512Size

l = 12.7 mm

IC = 12.7 mm · 1/2″

604Thickness

s = 4.76 mm

between rake faces

712Corner radius

rε = 1.2 mm

code ÷ 10 → radius in mm

✓ 4 corners × 2 sides = 8 cutting edges

Full designation: SNMG 120412 = square 90° · negative · class M · hole and chip breaker · IC 12.7 mm (l 12.7 mm) · s 4.76 mm · rε 1.2 mm

Compatible turning tools

holders with a square 12 pocket — external turning and boring

TSSNR/L 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
TSSNR/L 2525 M1225×25 × 150 mmR right-hand
←
L left-hand
→
TSSNR/L 3232 P1232×32 × 170 mmR right-hand
←
L left-hand
→
TSDNN 2020 K1220×20 × 125 mmNeutral
↔
TSDNN 2525 M1225×25 × 150 mmNeutral
↔
TSDNN 3232 P1232×32 × 170 mmNeutral
↔
TSKNR/L 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
TSKNR/L 2525 M1225×25 × 150 mmR right-hand
←
L left-hand
→
TSKNR/L 3232 P1232×32 × 170 mmR right-hand
←
L left-hand
→
PSSNR/L 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
PSSNR/L 2525 M1225×25 × 150 mmR right-hand
←
L left-hand
→
PSSNR/L 3232 P1232×32 × 170 mmR right-hand
←
L left-hand
→
PSDNN 2020 K1220×20 × 125 mmNeutral
↔
PSDNN 2525 M1225×25 × 150 mmNeutral
↔
PSDNN 3232 P1232×32 × 170 mmNeutral
↔
PSKNR/L 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
PSKNR/L 2525 M1225×25 × 150 mmR right-hand
←
L left-hand
→
PSKNR/L 3232 P1232×32 × 170 mmR right-hand
←
L left-hand
→
PSBNR/L 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
PSBNR/L 2525 M1225×25 × 150 mmR right-hand
←
L left-hand
→
PSBNR/L 3232 P1232×32 × 170 mmR right-hand
←
L left-hand
→
PSSNR/L-PH 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
PSSNR/L-PH 2525 M1225×25 × 150 mmR right-hand
←
L left-hand
→
PSKNR/L-PH 2525 M1225×25 × 150 mmR right-hand
←
L left-hand
→
PSKNR/L-PH 3232 P1232×32 × 170 mmR right-hand
←
L left-hand
→
PSBNR/L-PH 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
PSBNR/L-PH 2525 M1225×25 × 150 mmR right-hand
←
L left-hand
→
PSBNR/L-PH 3232 P1232×32 × 170 mmR right-hand
←
L left-hand
→
S25S TSKNR/L-12Ø25 | Ømin 32 mm | L=250R right-hand
←
L left-hand
→
S32T TSKNR/L-12Ø32 | Ømin 40 mm | L=300R right-hand
←
L left-hand
→
S40U TSKNR/L-12Ø40 | Ømin 50 mm | L=350R right-hand
←
L left-hand
→
S50V TSKNR/L-12Ø50 | Ømin 63 mm | L=400R right-hand
←
L left-hand
→
A25R PSKNR/L-12Ø25 | Ømin 32 mm | L=200R right-hand
←
L left-hand
→
A32S PSKNR/L-12Ø32 | Ømin 40 mm | L=250R right-hand
←
L left-hand
→
S25S PSKNR/L-12Ø25 | Ømin 32 mm | L=250R right-hand
←
L left-hand
→
S32T PSKNR/L-12Ø32 | Ømin 40 mm | L=300R right-hand
←
L left-hand
→
S40U PSKNR/L-12Ø40 | Ømin 50 mm | L=350R right-hand
←
L left-hand
→

Frequently asked questions about the SNMG 120412 insert

use, turning tool selection, and turning parameters

Eight — a square has 4 corners per side, and the negative geometry (0° clearance angle) allows both sides of the insert to be used. Once a corner becomes dull, simply index the insert in its pocket without replacing the holder.

Holders with a square 12 pocket (IC 12.7 mm): for external turning TSSNR/L and PSSNR/L and TSDNN and PSDNN (45° entering angle), as well as TSKNR/L, PSKNR/L and PSBNR/L (75°) with shank cross sections of 20×20–32×32 mm; for boring, boring bars S25S–S50V with a TSKNR/L or PSKNR/L head. The full list is provided in the compatible turning tools section.

Only in corner radius: 0.4 mm is used for finishing at low feed rates, 0.8 mm is the general-purpose version, and 1.2 mm is selected for roughing castings at higher feed rates and depths of cut. The other dimensions (IC 12.7 mm, thickness 4.76 mm) are identical.

Grade H5115 is designed for cast iron (group ISO K) and provides the best tool life in this material. For structural steel or stainless steel, select an SNMG insert in a grade from group P or M, suited to ductile materials.

Product accessories

Reviews

No customer reviews for the moment.

Add a review about the product

Carbide insert SNMG 120412 H5115 Horn

Carbide insert SNMG 120412 H5115 Horn

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information