Description
| Technical data | |
|---|---|
| Side length l | 8.7 mm |
| Insert thickness s | 4.76 mm |
| Hole diameter d1 | 5.16 mm |
| Corner radius rε | 0.8 mm |
| ANSI code | WNMG 432 |

finishing, semi-finishing and roughing — ISO P and M groups
| Material | Finishing | Semi-finishing | Roughing | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | |
| PSteel | 200-295 | 0.15 | 0.5 | 170-240 | 0.3 | 2.5 | 150-215 | 0.5 | 4 |
| MStainless steel | 110-230 | 0.15 | 0.5 | 70-175 | 0.3 | 2.5 | 50-135 | 0.5 | 4 |
double-sided 80° trigon with a hole and chip breaker
The WNMG 080408 turning insert is a double-sided indexable insert made of H6310 grade cemented carbide, designed for turning steel and stainless steel. Shape W, a trigon with a 80° corner angle, combines rigidity close to that of a square insert with better access to the workpiece contour than a sharp triangle provides. Negative geometry with a 0° clearance angle allows both sides of the insert to be used — a total of six cutting edges. The rε 0.8 mm nose radius balances surface finish with corner strength at feed rates of 0.15–0.5 mm/rev.
The mounting hole and double-sided chip breaker (type G per ISO 1832) control chip flow and breaking during longitudinal turning and facing. PVD-coated H6310 carbide covers ISO groups P20-P40 and M20-M40, allowing one insert to handle structural steel, alloy steel, and stainless steel, as well as cast iron occasionally. Tolerance class M ensures repeatable edge positioning after rotating the insert in its pocket, reducing tool setup time. Size 08 corresponds to an inscribed circle IC of 12.7 mm (1/2″) and fits standard holders with a size 08 pocket. The commercial suffix MA is a catalog designation and does not affect the insert geometry or application range.
The WNMG 080408 insert (also written without spaces as wnmg080408) is suitable for turning shafts, bushings, and flanges made of structural steels, as well as stainless steel components, covering typical external and internal turning insert applications. Calculate spindle speed using n = 1000·Vc/(π·D): for a shaft diameter of 50 mm at Vc = 200 m/min, the result is approximately 1273 rpm. For stainless steels, maintain a cutting speed of 50–230 m/min and a constant feed to limit work hardening of the layer being cut. H6310 grade indexable inserts are supplied by the Korean brand Horn.
Grade H6310 is not intended for steels hardened above 45 HRC — for turning inserts for hardened steel and hard turning, choose a version with a cubic boron nitride edge (CBN).
how to read the WNMG 080408 code — positions 1–7 of the designation
Designation WNMG 080408 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
ISO 1832 designation decoder — how to read the code
Positions 1–4 · ISO code
1WShape
80° trigon
3 corners of 80° per side
2NClearance angle
α = 0°
negative, double-sided
3MTolerance
Class M (intermediate)
IC ±0.08 · thickness ±0.13 mm
4GType
Hole + chip breaker
chip breaker on both sides
Positions 5–7 · dimensions [mm]
508Size
l = 8.7 mm
IC = 12.7 mm · 1/2″
604Thickness
s = 4.76 mm
between rake faces
708Corner radius
rε = 0.8 mm
code ÷ 10 → radius in mm
✓ 3 corners × 2 sides = 6 cutting edges
holders with a size 08 trigon pocket (IC 12.7 mm) — external and internal turning
use, turning tool selection, and turning parameters
Six — the trigon has 3 corners per side, and the negative geometry (clearance angle 0°) allows both sides of the insert to be used. When a corner becomes dull, simply index the insert in the pocket without changing the holder.
Holders with a size 08 trigon pocket (IC 12.7 mm): for external turning TWLNR/L, PWLNR/L and MWLNR/L (entering angle 95°) and MWDNN (50°) with shank cross sections of 20×20–50×50 mm; for internal turning, boring bars S25S–S50V with the suffix TWLNR/L, PWLNR/L, or MWLNR/L.
Only in corner radius: 0.4 mm is used for finishing at low feed rates, 0.8 mm is the general-purpose version, and 1.2 mm is selected for roughing at higher feed rates. The remaining dimensions (IC 12.7 mm, thickness 4.76 mm) are identical.
Yes — grade H6310 covers group ISO M20-M40. Maintain a cutting speed of 50–230 m/min, a constant feed, and continuous cooling: austenitic steel dissipates heat poorly and work-hardens when cutting is too slow.
Reference: 0000004240 In stock > 10 items
€6.47 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.