Description
| Technical data | |
|---|---|
| nominal diameter d1 | UNC 1 inch |
| thread pitch P | 8 threads per inch |
| overall length l1 | 160 mm |
| flute length l2 | 38 mm |
| working length l3 | 30 mm |
| shank diameter d2 | 20 mm |
| square drive size | 16 mm |
| tap drill diameter | 22.25 mm |
| Chamfer | C (2÷3) P |
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. It has no helix to convey chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute beside the cutting edges that produced them. They leave the hole only when the tap is backed out. The UNC 1-8 tap has a reduced shank to DIN 376: diameter 20 mm, square 16 mm.
Reference: 10480 In stock > 10 items
€29.13 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.