Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
CROSS SECTION 20×20 mm
LENGTH 125 mm
INSERT CNMG 1204rr
ANGLE κr 45°
Technical specifications of the MCSNR 20X20-12 turning tool
| Technical Data | |
|---|---|
| ISO designation | MCSNR 20X20-12 |
| Shank height (h) | 20 mm |
| Shank width (b) | 20 mm |
| Overall length (L) | 125 mm |
| Functional overhang (f) | 32 mm |
| Entering angle (κr) | 45° |
| Clearance angle | 0° (negative) |
| Clamping system | ISO — combination (M) |
| Insert type | CNMG 1204rr |
| Cutting direction | R — right-hand |
| Manufacturer | Varel |
MCSNR 20X20-12 turning tool – for longitudinal turning and facing
Professional indexable turning tool 20×20 mm for a CNMG insert
Turning tool MCSNR 20X20-12 is a professional turning tool designed for external turning on conventional and CNC lathes. The shank, with a cross section of 20×20 mm and a length of 125 mm, provides the rigidity required for industrial machining. The geometry with an entering angle of 45° allows simultaneous longitudinal turning and angled facing.
The combination clamping system (M) ensures maximum clamping rigidity and quick replacement of the CNMG 1204rr insert. The negative geometry of the 80° rhombic insert with 8 cutting edges is well suited to roughing and medium machining, providing high cutting edge strength and cost efficiency thanks to its double-sided design. The tool is compatible with CNMG 12 inserts in various carbide grades — select the grade to match the workpiece material.
Typical applications of the MCSNR 20X20-12 turning tool
Cutting operations:
| ▸ | Longitudinal turning with facing — the 45° angle allows simultaneous cutting along the axis and facing |
| ▸ | Roughing and medium machining — negative CNMG geometry provides maximum cutting edge strength |
| ▸ | Chamfering and external tapers — 45° angle ideal for 45° chamfers |
| ▸ | Turning steps and shoulders — machining cylindrical surfaces with changes in diameter |
| ▸ | CNC production runs — quick insert replacement and repeatable positioning |
Included
Package contents for MCSNR 20X20-12
Package contents:
| ✓ | Tool body MCSNR 20X20-12 | 1 pcs |
| ✓ | Combination clamp (clamp + pin) | 1 pcs |
| ✓ | Hex key for insert replacement | 1 pcs |
| ✗ | CNMG 1204rr cutting insert (sold separately) | — |
Compatible CNMG 1204rr insert
CNMG 1204rr
The cutting insert is not included in the set — must be purchased separately. CNMG insert. Negative geometry means that the insert is double-sided and has 8 cutting edges, providing maximum cutting edge strength and cost efficiency.
Select the insert grade to match the workpiece material: P (structural steels), M (stainless steel), K (cast iron), N (aluminum). You can find compatible inserts in the section "Related products" below.
Insert installation and replacement for the MCSNR 20X20-12 turning tool
Instructions for the combination clamping system (M)
Insert replacement procedure step by step
1 Loosen the clamp
Loosen the clamping screw 2-3 turns
2 Clean the insert seat
Remove chips and debris
3 Install the insert
Fit onto the pin and press down
4 Tighten the clamp
Torque 1.5–2.5 Nm
Important: Do not exceed the recommended tightening torque — this may damage the thread in the seat or crack the insert.
Checks before starting work:
| ▸ | Tool overhang — do not exceed 1.5× the shank height without support |
| ▸ | Cutting edge height — set the cutting edge at spindle center height (±0.05 mm) |
| ▸ | Insert seat condition — check that the contact surface is not damaged or worn |
| ▸ | Secure clamping — the insert must have no play in the seat |
| ▸ | Indexing — when an edge wears out, rotate the insert to a fresh edge (8 edges in total) |
Note: Use coolant during machining — it extends insert life and improves surface finish. When machining without coolant, reduce the cutting parameters by 20–30%.
Frequently asked questions — MCSNR 20X20-12
This tool accepts inserts CNMG 1204rr in any carbide grade. Select the grade to match the workpiece material: P (steels), M (stainless steel), K (cast iron), N (aluminum). You can find compatible inserts in the "Related products" section below.
The entering angle of 45° allows simultaneous longitudinal turning and facing at 45°. Ideal for machining chamfers, tapers, and transitions between diameters.
The CNMG insert has negative geometry (clearance angle 0°), which means that it is double-sided with 8 cutting edges. When one edge wears out, rotate or flip the insert to use the next edge — this significantly reduces tooling cost per part.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.