Net price: €7.11
Description
| Technical data | |
|---|---|
| Side length l | 16.6 mm |
| Insert thickness s | 4.76 mm |
| Hole diameter d1 | 3.81 mm |
| Corner radius rε | 0.4 mm |
| ANSI code | VNMG 331 |
| Inscribed circle diameter IC | 9.525 mm |

finishing, semi-finishing and roughing — ISO P and M groups
| Material | Finishing | Semi-finishing | Roughing | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | |
| PSteel | 200-295 | 0.1 | 1 | 170-240 | 0.25 | 3 | 150-215 | 0.3 | 4 |
| MStainless steel | 110-230 | 0.1 | 1 | 70-175 | 0.25 | 3 | 50-135 | 0.3 | 4 |
double-sided 35° diamond with a hole and chip breaker
The VNMG 160404 turning insert is a double-sided, indexable diamond insert made of grade H6310 cemented carbide, designed for turning steel and stainless steel. The V shape, a diamond with a 35° corner angle, enables machining of profiles and undercuts that inserts with obtuse corners cannot reach. The negative geometry with a 0° clearance angle allows both sides of the insert to be used — a total of four cutting edges. The nose radius rε of 0.4 mm makes it the finishing variant in the VNMG 1604 family, for precision passes at low feed rates. The hole and chip breaker on both sides (type G according to ISO 1832) control chip flow and chip breaking during longitudinal and copy turning.
The sharp 35° corner angle makes VNMG 160404 suitable for form turning, copy turning and machining thin flanges, where tool access to narrow areas of the workpiece matters. The shorter active cutting edge reduces cutting forces, which helps when machining slender shafts prone to vibration. The chip breaker on both sides breaks chips into short segments and protects the machined surface from scratches. However, the narrower corner is more sensitive to thermal loads, so maintain a constant coolant supply and avoid interruptions in cutting when machining austenitic stainless steel.
The VNMG 160404 insert (also written without a space as vnmg160404) covers finish turning of shafts, bushings and pins made of structural steels, as well as stainless steel components. As an indexable cemented carbide insert, it replaces several solid tools and reduces changeover time. Calculate spindle speed using n = 1000·Vc/(π·D): for a shaft with a diameter of 50 mm at Vc = 200 m/min, the result is approximately 1273 rpm. When machining stainless steel, maintain a cutting speed of 110–230 m/min and a constant feed rate to reduce work hardening of the layer being cut. Grade H6310 cutting inserts are supplied by the Korean brand Horn.
Grade H6310 is not intended for steels hardened above 45 HRC — for hard turning, select the version VNMG 160404 CBN with a cubic boron nitride cutting edge.
how to read the VNMG 160404 code — positions 1–7 of the designation
Designation VNMG 160404 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
ISO 1832 designation decoder — how to read the code
Positions 1–4 · ISO code
1VShape
35° rhombus
2 corners of 35° per side
2NClearance angle
α = 0°
negative, double-sided
3MTolerance
Class M (intermediate)
IC ±0.05 · thickness ±0.13 mm
4GType
Hole + chip breaker
chip breaker on both sides
Positions 5–7 · dimensions [mm]
516Size
l = 16.6 mm
IC = 9.525 mm · 3/8″
604Thickness
s = 4.76 mm
between rake faces
704Corner radius
rε = 0.4 mm
code ÷ 10 → radius in mm
✓ 2 corners × 2 sides = 4 cutting edges
holders with a 16 diamond pocket — external turning and boring
use, turning tool selection, and turning parameters
Four — the diamond has 2 corners per side, and the negative geometry (0° clearance angle) allows both sides of the insert to be used. Once an edge becomes dull, simply rotate the insert in its pocket without changing the holder.
Holders with a 16 diamond-shaped pocket (IC 9.525 mm): for external turning TVJNR/L (entering angle 93°), TVHNR/L (107.5°) and neutral TVVNN with shank cross sections of 20×20–40×40 mm; for boring, boring bars S25S–S50V with a TVUNR/L head.
Only in corner radius: 0.4 mm is a finishing variant for precision passes at low feed rates, while 0.8 mm is a general-purpose variant with a stronger cutting edge. The other dimensions (IC 9.525 mm, thickness 4.76 mm) are identical.
Yes — grade H6310 covers group ISO M20-M40. Maintain a cutting speed of 110–230 m/min, a constant feed, and continuous emulsion cooling: austenitic steel conducts heat poorly and work-hardens when cutting is too slow.
Reference: 0000009635 In stock > 10 items
€8.74 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.