• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Carbide insert RPMT 1204MO TT H6310 Horn - Milling inserts
search
  • Carbide insert RPMT 1204MO TT H6310 Horn - Milling inserts
  • Carbide insert RPMT 1204MO TT H6310 Horn - Milling inserts - nr. 1
Horn

Carbide insert RPMT 1204MO TT H6310 Horn

Horn Horn
5756
Cutting edge length: 122 sizes of this insert
€4.53 tax inc.

Net price: €3.68

Instant Shipping
W magazynie: +100 szt.
W magazynie: +100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

RPMT 1204MO milling insert – round, positive 11°

Technical data
Diameter d (side length l)12.70 mm
Insert thickness s4.76 mm
Full radius R6.35 mm
Clearance angle α11° (positive)
Tolerance classM
GradeH6310 (PVD)
Round RPMT 1204MO milling insert, grade H6310, mounting hole and chip breaker

Cutting data for the RPMT 1204MO round insert

face and copy milling — conservative ranges for ISO P and M groups

Materialvc [m/min]Feed fz [mm/tooth]ap [mm]ae [% D]
PSteel, cast steel150-2200.10-0.220.5-3.060-80
MStainless steel80-1400.08-0.180.3-2.050-70

Round H6310 carbide insert – applications and design

full radius, positive geometry, discontinuous chips of varying thickness

The RPMT 1204MO milling insert is a round, positive indexable insert made of grade H6310 cemented carbide, designed for milling steel, cast steel, and stainless steel. The R shape, a full circle, forms one continuous edge with no corners that could chip under load. This allows the insert to withstand varying dynamic loads with a large and variable uncut chip cross section. The eleven° clearance angle in the positive geometry reduces cutting resistance and power consumption. A diameter of 12.70 mm and thickness of 4.76 mm provide a rigid edge for roughing, face milling, and copy milling. The Korean brand Horn offers this grade as a versatile solution for steel and stainless steel.

Key benefits of the round cemented carbide insert

  • Round edge without corners — the full radius distributes the load and resists chipping in interrupted cutting and when machining hard casting skins.
  • Grade H6310 for ISO groups P and M — PVD-coated carbide for steel P20-P40 and stainless steel M20-M40 with varying chip thickness.
  • Variable entering angle κ — forces are low at shallow depths and increase only as the depth of cut increases.
  • The 11° positive geometry reduces power consumption and supports use in less rigid milling heads.
  • The mounting hole and single-sided chip breaker guide the chip and facilitate quick replacement in the pocket.
  • Resistance to cyclic dynamic loads at high and medium cutting speeds.

Round insert applications and cutting data selection

The RPMT 1204MO insert performs well in copy and profile milling of molds, dies, and 3D surfaces, as well as rough face milling of steel and cast steel. Calculate the milling head speed using n = 1000·vc/(π·D): for a head with a diameter of 50 mm at vc = 180 m/min, the result is approximately 1146 rpm. Keep the feed per tooth (fz) within 0.10–0.22 mm for steel to maintain uniform chip thickness. The round geometry provides a long, strong edge, allowing a single insert to machine a large volume of material between indexing operations.

Select the depth of cut to keep cutting forces low: set ap no greater than half the radius, or approximately 3 mm for a radius of 6.35 mm. For stainless steel, reduce the cutting speed to 80–140 m/min and apply coolant continuously, because austenite conducts heat poorly and work-hardens. Climb milling on a CNC machine with table backlash eliminated extends tool life and improves surface quality. When machining materials with a varying chip cross section, a round carbide insert is particularly resistant to impact loads.

▲
Application limitation

Grade H6310 is not intended for hardened steels — for harder materials, choose grade H8320 or an insert with a ceramic or cubic boron nitride (CBN) cutting edge.

Round insert designation decoder according to ISO 1832

how to read the RPMT 1204 code — positions 1–6 of the designation

Designation RPMT 1204 according to the standard ISO 1832: 4 letters describe geometry and construction, 2 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.

ISO 1832 designation decoder — how to read the code

1Rshape 2Pangle α 3Mtolerance 4Ttype – 512diameter 604thickness

Positions 1–3 · ISO code

1RShape

Round

peripheral edge without corners

2PClearance angle

α = 11°

positive, single-sided

3MTolerance

Class M (intermediate)

IC ±0.08 · thickness ±0.13 mm

Positions 4–6

4TType

Countersunk hole + chip breaker

countersink 40–60°, single-sided chip breaker

512Diameter

d = 12 mm

round insert — full radius

604Thickness

s = 4.76 mm

between rake faces

✓ Peripheral edge — full circle, no corners

Full designation: RPMT 1204 = round · positive 11° · class M · countersunk hole and chip breaker · Ø 12 mm · s 4.76 mm

Material compatibility of the RPMT 1204MO insert

grade H6310 — ISO groups and workpiece materials

Workpiece materialISO groupRecommendation
Structural steel and cast steelP20-P40✔ recommended
Stainless steelM20-M40✔ recommended
Discontinuous chips with a large and variable cross sectionP / M✔ advantage of the round edge
Hardened steelH✗ outside the H6310 application range

Frequently asked questions about the RPMT 1204MO insert

materials, round geometry, and cutting parameter selection

For structural steel and cast steel in group ISO P20-P40 and stainless steel in group ISO M20-M40. PVD-coated grade H6310 performs well with discontinuous chips of large and variable cross section. Do not use it for hardened steels.

The round edge has no corners, so it distributes the load over a long section and is highly resistant to chipping. The entering angle varies with the depth of cut: at a shallow depth ap forces are low and increase only at greater depths. This is an advantage in copy milling and roughing.

To keep cutting forces low, set ap no greater than half the radius. For a radius of 6.35 mm this gives approximately 3 mm per pass. Greater depth increases the entering angle and chip thickness, requiring a more rigid milling head and greater spindle power.

The insert diameter is 12.70 mm, corresponding to a full radius of 6.35 mm, and the thickness is 4.76 mm. Tolerance class M ensures repeatable edge positioning after the insert is rotated in the milling head pocket.

Reviews

No customer reviews for the moment.

Add a review about the product

Carbide insert RPMT 1204MO TT H6310 Horn

Carbide insert RPMT 1204MO TT H6310 Horn

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information