Description
| Technical data | |
|---|---|
| Insert shape | round (R) |
| Inscribed circle diameter IC | 8.0 mm |
| Insert thickness s | 3.18 mm |
| Clearance angle α | 15° (D) |
| W design | with a hole, without a chip breaker |
face milling and copy milling — ISO groups P and M, conservative values
| Material | Vc [m/min] | Feed fz [mm/tooth] | ap [mm] | ae [% D] |
|---|---|---|---|---|
| PSteel | 150-220 | 0.10-0.22 | ≤ 0.5×R | 60-80 |
| MStainless steel | 80-140 | 0.08-0.18 | ≤ 0.5×R | 50-70 |
one continuous edge, variable entering angle, screw clamping
The RDMW 0803 milling insert is a round indexable insert made of cemented carbide in grade H6310, intended for milling steel and stainless steel. The round shape (position R according to ISO 1832) and a clearance angle of fifteen degrees provide one continuous edge without a corner that could chip. The letter W in the designation indicates a design with a hole but without a chip breaker. The PVD-coated carbide (physical vapor deposition) withstands the thermal shocks of interrupted cutting. The entire insert edge forms a single continuous arc (shape R), so it operates with a variable entering angle. The design without a chip breaker allows free chip flow, making the insert suitable for copy milling and machining curved surfaces.
The round insert is suitable for copy milling and profile milling of structural steels and stainless steel components. Its round shape means that the effective entering angle increases with depth of cut: at low ap, the chip is thin and forces are low. A shallower cut produces a smaller angle and a thinner chip, so the round insert naturally scales cutting forces with depth. Indexable inserts in grade H6310 are supplied by the Korean brand Horn.
When machining stainless steels, maintain a cutting speed of 80–140 m/min and a constant feed per tooth to limit work hardening of the layer being cut. Select the depth of cut conservatively according to the rule ap ≤ 0.5×R, where R is the radius of the round insert; as ap increases, the effective entering angle and cutting forces increase. Use climb milling, entering at the thicker part of the chip, to extend tool life and improve the machined surface finish. Calculate the table feed rate using vf = fz × z × n, where fz is the feed per tooth, z is the number of inserts in the milling head, and n is the spindle speed. For example, with fz = 0.15 mm/tooth, z = 5 and n = 900 rpm: vf = 0.15·5·900 = 675 mm/min.
Grade H6310 is designed for steel (ISO P) and stainless steel (ISO M), not for hardened steels or hard machining — for hardened materials, select a grade intended for ISO H.
how to read the RDMW 0803 code — designation positions 1–6
Designation RDMW 0803 according to the standard ISO 1832: 4 letters describe geometry and construction, 2 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
ISO 1832 designation decoder — how to read the code
Positions 1–3 · ISO code
1RShape
Round
peripheral edge without corners
2DClearance angle
α = 15°
positive, single-sided
3MTolerance
Class M (intermediate)
IC ±0.05 · thickness ±0.13 mm
Positions 4–6
4WType
Countersunk hole, no chip breaker
40–60° countersink, smooth rake face
508Diameter
d = 8 mm
round insert — full radius
603Thickness
s = 3.18 mm
between rake faces
✓ Peripheral edge — full circle, no corners
recommended materials and milling operations — ✔ / ✗ overview
| Application / material | Compatibility |
|---|---|
| Structural steel (ISO P20-P40) | ✔ recommended |
| Austenitic stainless steel (ISO M20-M40) | ✔ recommended |
| Copy, profile, and plunge milling | ✔ recommended |
| Round-insert milling heads and cutters for R inserts with an IC of 8.0 mm | ✔ compatible |
| Hardened steel / hard machining (ISO H) | ✗ outside the range |
| Milling stainless steel without coolant | ✗ not recommended |
edges, depth of cut, materials and indexing
The round insert has one continuous edge cutting around the entire circumference, without distinct corners. Index the insert by rotating it a few degrees in its pocket to use a fresh section of the edge. The practical number of positions depends on the milling head design.
Use the conservative rule ap ≤ 0.5×R, where R is the insert radius. At a shallow depth of cut, the effective entering angle and cutting forces remain low and increase with ap.
Grade H6310 is a PVD-coated carbide for groups ISO P20-P40 (steel) and M20-M40 (stainless steel). It is not intended for hardened steels or hard machining — for hardened materials (ISO H group), select a grade designed for these tasks.
The round edge has no tip that could chip, so it withstands rough milling and copy milling better. The variable entering angle means that chip thickness and forces increase only as the depth of cut increases, protecting the spindle at low ap.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.