- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
MGMN 150 insert -JM H6310 indexable Horn parting insert from the Korean company Horn for parting or grooving.
Technical data for the 1.5 mm MGMN parting insert
Dimensions and geometric parameters
| Technical data | |
|---|---|
| Cutting width b | 1.5 mm |
| Corner radius r | 0.2 mm |
| overall length l | 15 mm |
| width d | 1.7 mm |
| height t | 4.8 mm |
The MGMN parting insert with a width of 1.5 mm allows
Turning operations with the MGMN 150 insert
-
parting
-
turning
-
grooving
-
facing
MGMN 150 cutting data — grade NC3120
Speeds and feeds for 3 machining operations
| Material | Parting | Facing | Grooving / turning | |||
|---|---|---|---|---|---|---|
| Vc [m/min] | fn [mm/rev] | Vc [m/min] | fn [mm/rev] | Vc [m/min] | fn [mm/rev] | |
| P Carbon steel | 80 – 180 | 0.02 – 0.15 | 100 – 160 | 0.05 – 0.10 | 80 – 200 | 0.04 – 0.09 |
| P Alloy steel | 70 – 150 | 0.02 – 0.15 | 50 – 130 | 0.05 – 0.10 | 80 – 180 | 0.04 – 0.08 |
| M Stainless steel | 50 – 120 | 0.02 – 0.10 | 60 – 150 | 0.05 – 0.10 | 60 – 100 | 0.04 – 0.09 |
MGMN 150 parting and grooving insert – 1.5 mm insert for steel and stainless steel
Grade H6310 with CVD coating
The MGMN 150 T H6310 Horn insert is a double-ended carbide insert with a cutting edge width of 1.5 mm, designed for parting small- and medium-diameter shafts and cutting external grooves on conventional and CNC lathes. The CVD-coated cemented carbide grade H6310 covers the ISO P20-P40 and M10-M25 application ranges, providing versatility in machining unalloyed, alloy, and stainless steels. The insert is compatible with MGMN-type indexable tools with a spring clamping system. Its 2-edge design allows the insert to be indexed after the first edge wears out and machining to continue without replacement.
Key features of the MGMN 150 H6310 Horn insert
- CVD coating resistant to temperatures of 700-1000°C maintains cutting edge stability even during intensive parting at high feed rates
- Grade H6310 in the ISO P20-P40 and M10-M25 ranges provides an optimal balance between hardness and chipping resistance when machining steel and stainless steels
- Cutting width of 1.5 mm with T-type geometry enables precise parting of shafts up to 12 mm in diameter and cutting of narrow retaining ring and seal grooves
- The double-ended design provides 2 independent cutting edges, reducing the machining cost per 1 component by 50 percent
- The cutting width of 1.5 mm provides a balance between minimal material loss and sufficient cutting edge rigidity — a good choice for machining medium-diameter workpieces
- The chip breaker geometry ensures controlled chip evacuation from the narrow groove without the risk of jamming or surface damage
The MGMN 150 parting and grooving insert is suitable for series production of small- and medium-diameter shaft components, machining precision grooves for retaining rings, and parting workpieces requiring a narrow cut. The recommended cutting speed Vc is 120-180 m/min for structural steel and 80-120 m/min for stainless steel at feed rates of 0.02-0.12 mm/rev. Emulsion cooling extends cutting edge life by a factor of 2-3 compared with dry machining.
Compatible turning tools
for the MGMN 100 insert (groove width 1 mm)
MGEHR/L 16x16-116×16 × 100 mm | Tmax 15R right-hand
←L left-hand
→
←L left-hand
→
MGEHR/L 20x20-120×20 × 125 mm | Tmax 15R right-hand
←L left-hand
→
←L left-hand
→
BIKT R/L 16 K1.5C T4Ø16 × 150 mm | Tmax 4R right-hand
←L left-hand
→
←L left-hand
→
BIKT R/L 20 K1.5C T6Ø20 × 170 mm | Tmax 6R right-hand
←L left-hand
→
←L left-hand
→
Frequently asked questions
MGMN 150 H6310 Horn insert
Frequently asked questions
The MGMN 150 insert in grade H6310 is suitable for machining structural and alloy steels in the ISO P20-P40 range and stainless and acid-resistant steels in the ISO M10-M25 range. It can also be used for parting gray cast iron and cast steel.
With a cutting edge width of 1.5 mm and standard seating in the holder, the MGMN 150 insert allows shafts up to 12 mm in diameter to be parted off. For larger diameters, select the MGMN 200 (2 mm) or MGMN 300 (3 mm) insert.
The MGMN 150 with a 1.5 mm cutting edge provides a balance between minimal material loss (MGMN 100) and greater cutting edge rigidity (MGMN 200). Choose it for parting workpieces with diameters of 8-12 mm and cutting grooves where 1 mm is too narrow and 2 mm causes unnecessary material loss.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.