Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical specifications of the M30x1.5 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M30 |
| Thread pitch P mm | 1,5 mm |
| Overall length l1 | 127 mm |
| Length of working part l2 | 37 mm |
| Diameter of the shank part d2 | 20 mm |
| Size of square drive a | 16 mm |
| Threaded bore diameter | 28.5 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M30x1.5 fine thread hand taps
Hand Tap M30X1.5 DIN 2181/2 6H HSS used for manual fine-coil metric threading in steel and cast iron provides a 60-degree profile, secure axial guidance and a 6H grade hole fit in workshop and service applications.
Technical characteristics: size M30, pitch P=1.5; right-hand direction; HSS in ground design; straight grooves for controlled chip evacuation; stepped nut; cylindrical shank with square driver; recommended 28.5 mm drill bit for proper profile filling and stable alignment, even in blind holes.
- Load control - Graduated nut with entry chamfer reduces torsional torque and stabilizes the starting zone.
- Efficiency of stages - The M30x1.5 set of hand taps streamlines the transition from chipping to finishing without losing alignment.
- Fitting precision - Grade 6H works with 6g to maintain nominal clearance and contour purity.
- Surface quality - Ground blades and straight grooves reduce burrs and promote low roughness.
Set Taps manual M30x1.5 DIN 2181/2 6H HSS provides predictable coil geometry and consistent results in assembly and unit machining. Normative requirements: DIN 2181/2 (fabrication), ISO 68-1 (60-degree metric profile), ISO 261/262 (ranks and pitches), ISO 965 (6H hole tolerances).
M30x1.5 thread cutting stages in 2-piece set: ripper and finisher
Frequently asked questions
1. How many parts does the M30x1.5 set consist of?
The set includes two threaders: a ripper and a finisher, which are used in stages.
2. Is the M30x1.5 DIN 2181 threader suitable for blind holes?
Yes, the set can be used in through-holes and blind holes.
3. What materials can be threaded with the M30x1.5 tool?
The threader works well in low-carbon steel, aluminum, brass and other materials with good machinability.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
