Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of the hand tapping machine M2x0,25
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M2 |
| Thread pitch P mm | 0,25 mm |
| Overall length l1 | 44 mm |
| Length of working part l2 | 9 mm |
| Diameter of the shank part d2 | 2,5 mm |
| Size of square drive a | 2,0 mm |
| Threaded bore diameter | 1,75 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M2x0.25 - 2 piece HSS hand taps
Hand Tap M2x0.25 DIN 2181/2 HSS designed for micro threading in precision mechanics and electronics maintains a metric 60-degree profile and stable guidance in steel and cast iron materials; in hand work, provides a clean coil outline even for thin-walled workpieces.
Micro specification: size M2, pitch P=0.25; right-hand direction; HSS high-speed steel, ground finish; straight grooves for gentle evacuation of fine chips; stepped nut; cylindrical shank with square driver; recommended 1.75 mm drill bit for proper profile filling and reduced axial load. In sequential operation, the M2x0.25 Hand Tapping Set allows the full profile to be reached safely.
- Torque Control. Graduated nut reduces the risk of torquing at very small diameters.
- Test run stability. A sequence of two-three threaders makes it easier to achieve predictable coil parameters in pilot batches.
- Coil smoothness. Ground micro-geometry and straight grooves reduce burrs, making it easier to install miniature screws.
- Axiality of guidance. Accurate grip and uniform chip breaking stabilize entry into the material.
Set Taps M2x0.25 DIN 2181/2 HSShandhelds guarantee repeatable geometry and predictable results in precision applications. Standards: DIN 2181/2 - fabrication; ISO 68-1 - metric 60-degree outline; ISO 261/262 - series and pitch; ISO 965 - tolerances for 6H hole.
M2x0.25 thread cutting stages in 2-piece set: ripper and finisher
Frequently asked questions
1. What does the M2x0.25 set include?
The set consists of two thread cutters - a peeler and a finisher, which, when used consecutively, guarantee full thread formation.
2. What pre-drill for M2x0.25?
Drill 1.75 mm (2.00 mm diameter minus 0.25 mm pitch) to get the correct filling of the profile in class 6H.
3. What materials is the M2x0.25 tapping tool designed for?
The HSS tool works well on low-carbon steel, aluminum, brass and other materials with good machinability.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
