• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Carbide insert SPKN 250620 for Korloy steel - Carbide insert milling machine
search
  • Carbide insert SPKN 250620 for Korloy steel - Carbide insert milling machine
  • Carbide insert SPKN 250620 for Korloy steel - Carbide insert milling machine - nr. 1
Artykuły Techniczne

Carbide insert SPKN 2506 EDR NC3020 Korloy

Artykuły Techniczne Artykuły Techniczne
00795
Cutting edge length: 25 mm3 sizes of this insert
€9.71 tax inc.

Net price: €7.89

Instant Shipping
W magazynie: 2 pcs.
W magazynie: 2 pcs.

Instant Shipping

Call and order: (44) 755-04-05

Description

SPKN 2506 milling insert – 75° square with a wiper edge

Technical data
Insert shape square (S)
Side length l 25.40 mm
Insert thickness s 6.35 mm
Corner radius rε 2.00 mm
ANSI code SPKN 84
Inscribed circle diameter IC 25.40 mm
Entering angle κ 75°
Clearance angle 11° (positive)
Mounting with a clamp / wedge
Grade NC3020 (Korloy)
SPKN 2506 EDR square milling insert, Korloy grade NC3020, without a hole, with a wiper edge

Starting parameters from the 45° face milling table

conservative comparison with the 45° table for groups P, M and K — verify for the specific 75° milling head

Workpiece materialISO groupvc [m/min]fz [mm/tooth]ap [mm]
PStructural steel P 150-220 0.10-0.22 0.5-3.0
MStainless steel M 80-140 0.08-0.18 0.3-2.0
KCast iron K 180-300 0.10-0.28 1.0-4.0

Design and applications of the square insert without a hole

single-sided 75° square with a ground wiper edge at the corner

The SPKN 2506 milling insert is a square, single-sided indexable insert made of cemented carbide in grade NC3020 from Korloy. The square designated by the letter S provides four cutting edges on one side of the insert. The large format, with a side length of 25.40 millimeters and a thickness of 6.35 millimeters, withstands high forces when face milling wide surfaces. The design has no hole or chip breaker, so the insert is secured in the milling head pocket with a top clamp or wedge. The positive geometry with a clearance angle of eleven degrees reduces cutting resistance and power consumption. The suffix EDR describes an entering angle of seventy-five degrees, a chamfer clearance angle of fifteen degrees and a right-hand version. A ground wiper edge at the corner improves the machined surface finish during face milling.

Key benefits of the NC3020 cemented carbide insert

  • Four cutting edges — the square, single-sided insert provides 4 corners; after wear, rotate the insert in the milling head pocket without replacing the holder.
  • Wiper edge at the corner — the ground wiper reduces the roughness of the machined surface without reducing the feed rate per minute.
  • Positive 11° geometry — lower forces and power consumption, smoother cutting with less rigid milling heads.
  • Grade NC3020 covers ISO P, M and K groups — steel, stainless steel and cast irons.
  • Clamp or wedge mounting without a hole simplifies replacement and increases pocket rigidity.
  • κ=75° (less than 90°) thins the chip and increases the proportion of the axial force component compared with a 90° milling head.

Square insert applications and cutting data selection

The SPKN insert operates in face milling heads with an entering angle of seventy-five degrees and machines flat surfaces in steels, stainless steels and cast irons. Calculate chip thickness using hex = fz × sin(κ). With a feed per tooth fz of 0.15 mm and an angle κ of seventy-five degrees, the chip thickness is 0.15 × 0.966, or approximately 0.145 millimeters. The thinner chip compared with a ninety-degree milling head allows a higher feed at the same cutting force. Use climb milling on CNC machine tools — the cutting edge enters at the thicker part of the chip, extending edge life and improving surface finish.

The ground wiper edge works correctly only at an appropriate feed: keep the feed per revolution no greater than sixty percent of the width of this edge, otherwise the wiper stops smoothing the surface. For stainless steels, reduce the cutting speed and maintain a constant feed to limit work hardening of the layer being cut. The large corner radius of two millimeters strengthens the tip and favors roughing and semi-finishing. SPKN indexable inserts in grade NC3020 are supplied by the South Korean manufacturer Korloy.

▲
Application limitation

Inserts SPKN fit only face milling heads with an entering angle of 75°. Do not install them in 90° shoulder milling heads (these require inserts TPKN) or in 45° milling heads (inserts SEKN).

Square insert designation decoder according to ISO 1832

how to read the SPKN 250620 EDR code — positions 1–9 of the designation

Designation SPKN 250620 EDR according to the standard ISO 1832: 4 letters describe the geometry and construction, 2 numeric codes describe the dimensions, and the suffix EDR — the wiper edge geometry. Each field has a number, an icon and a brief description.

ISO 1832 designation decoder — how to read the code

1Sshape 2Pangle α 3Ktolerance 4Ntype – 525size 606thickness 720radius rε – 7Eangle κ 8Dland α′ 9Rhand

Positions 1–4 · ISO code

1SShape

Square 90°

4 corners of 90° per side

2PClearance angle

α = 11°

positive, single-sided

3KTolerance

Class K (precision)

ground thickness ±0.025 mm

4NType

Without hole or chip breaker

clamp or wedge mounting

Positions 5–7 · dimensions [mm]

525Size

l = 25.4 mm

IC = 25.4 mm (square: IC = l)

606Thickness

s = 6.35 mm

between rake faces

720Corner radius

rε = 2 mm

code ÷ 10 → radius in mm

EDR suffix · wiper edge

7EEntering angle

κ = 75°

75° face milling heads

8DWiper land

α′ = 15°

wiper land clearance angle

9RHand

Right-hand

standard clockwise spindle rotation

✓ 4 corners × 1 side = 4 cutting edges

Full designation: SPKN 250620 EDR = 90° square · positive 11° · class K · no hole or chip breaker · IC 25.4 mm (l 25.4 mm) · s 6.35 mm · rε 2 mm · κ 75° · wiper chamfer 15° · right-hand (R)

Compatible milling heads and mounting for the SPKN insert

75° face milling heads with clamp or wedge mounting

Selecting a milling head for the SPKN insert

RatingCompatibility
✓Face milling heads with an entering angle of 75° (e.g., FWT 75°, Darmet FB75SP15)
✓Top clamp or wedge mounting — insert without a hole
✓Steel (ISO P), stainless steel (ISO M) and cast iron (ISO K)
✗90° shoulder milling heads — their pockets are designed for inserts TPKN
✗45° face milling heads — their pockets are designed for inserts SEKN
✗Milling heads for inserts with a hole (APKT, SEKT) — different mounting system

Frequently asked questions about the SPKN insert

mounting, milling head selection, and milling parameters

Four — a square has 4 corners, and the positive geometry with a clearance angle of 11° makes the insert single-sided, cutting only with its top face. After a corner wears out, rotate the insert in the milling head pocket to the next edge without replacing the holder.

Face milling heads with an entering angle of 75°, for example FWT 75° or Darmet FB75SP15. The insert has no hole, so it is secured with a top clamp or wedge. It does not fit 90° shoulder milling heads (TPKN inserts) or 45° face milling heads (SEKN inserts).

These are three standardized sub-positions in the code: E = entering angle κ 75°, D = chamfer clearance angle 15°, R = right-hand version. The letter N in SPKN indicates an insert without a hole or chip breaker.

Grade NC3020 covers groups ISO P, M and K — structural steel, stainless steel and cast irons. As a starting point, you can use the conservative 45° face milling table: for steel vc 150-220 m/min, for stainless steel 80-140 m/min, and for cast iron 180-300 m/min. Verify the values in the catalog for the 75° milling head.

Reviews

No customer reviews for the moment.

Add a review about the product

Carbide insert SPKN 2506 EDR NC3020 Korloy

Carbide insert SPKN 2506 EDR NC3020 Korloy

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information