- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data for the UNF 5/8-18 hand tap
| Technical data | ||
|---|---|---|
| Nominal Diameter d1 Inches/mm/Decimal | UNF 5/8-18 | |
| Thread Pitch P in Inches and mm | 18 threads per inch | 1.41 mm |
| Thread Diameter d1 mm / Decimal | 15.88 mm / 0.6250 in | |
| Thread angle G | 60° | |
| Thread Standard | UNF ANSI B-1.1 | |
| Overall Length l1 | 70 mm | |
| Flute Length l2 | 20 mm | |
| Shank Diameter d2 | 12 mm | |
| Square Drive Width Across Flats a | 9 mm | |
| Tap Drill Hole | 14.5 mm | |
Roughing tap and finishing tap – how much material each removes
Division of work in the 1–2 set
The UNF 5/8-18 thread is cut into the wall of a hole with a diameter of 14.5 mm. The thread groove extends 0.69 mm into the wall. A single tap would have to cut the entire groove at once, requiring high manual torque and risking breakage. The set divides this work into two passes.
The drawing shows the entire set in operation. Both taps have the same shank and the same length. They differ in their chamfer, the tapered tip: No. 1 has a chamfer spanning 8 threads, while No. 2 spans only 2 threads. The detail windows at the hole wall show how the thread groove deepens after each tap.
| Tap | Chamfer | Chamfer angle | Material removed | How it works in the hole |
|---|---|---|---|---|
| No. 1 – roughing tap | long, 8 threads | 5° | the main portion of the groove | enters smoothly and establishes thread alignment |
| No. 2 – finishing tap | short, 2 threads | 20° | the remainder, to the full profile | screws into the cut threads and produces the full 2B profile |
How to distinguish the taps in the set
The chamfer on No. 1 is 4 times as long as the chamfer on No. 2 — the difference is immediately visible when you place them side by side. No. 1 has an incomplete thread profile; only No. 2 has the full profile. The number is also indicated on the shank: No. 1 has one ring, No. 2 has none. Keep the set together and always start with the roughing tap.
How to tap a UNF 5/8-18 hole – sequence 1, 2
Hand tapping step by step
Thread UNF 5/8-18 in four steps
ØDrilling
Drill bit 14.5 mm
1Roughing tap
Chamfer 8 threads
2Finishing tap
Chamfer 2 threads
✓Finished thread
Tolerance 2B
Turning sequence: half a turn clockwise, a quarter turn counterclockwise | Between taps: remove chips from the hole
Start with the hole. Inch thread pitch is specified in threads per inch, so first convert it to millimeters: an inch is 25.4 mm, and 25.4 : 18 threads ≈ 1.41 mm. The UNF 5/8-18 thread diameter is 5/8 in, or 15.88 mm. The diameter of 15.88 mm minus the pitch of 1.41 mm gives 14.47 mm; in practice, use a 14.5 mm drill bit. An undersized hole is a common cause of taps twisting off in the workpiece.
Through hole or blind hole – how deep to drill
The set taps both types of holes. In a through hole, the thread extends through the full material thickness. In a blind hole, cut the thread to 39.7 mm, or 2.5 times the thread diameter (2.5 x 15.88 mm, shown as 2.5D in the drawing). Drill the hole deeper than the thread. The finishing tap has a chamfer spanning 2 threads, so approx. 2 incomplete threads remain near the bottom. The extra depth below the thread accommodates them along with the chips.
No. 1 – the roughing tap establishes thread alignment
Fit the roughing tap in the tap wrench and position it perpendicular to the surface. Check the angle from two sides, for example with a square. Turn half a turn clockwise, then a quarter turn counterclockwise. Reversing breaks the chip into short pieces – a slight crunch is normal. The first threads determine whether the thread will be straight.
No. 2 – the finishing tap produces the full profile
Unscrew the roughing tap and remove the chips from the hole. Screw the finishing tap into the cut threads by hand; it should engage them on its own. Continue turning with the same rhythm as with the roughing tap. The finishing tap removes the remaining material and cuts the groove to the full profile within tolerance 2B. When it screws in smoothly all the way, the thread is complete; check it with a UNF 5/8-18 screw.
UNF 5/8-18 hand tap – set of 2 pcs for precise fine threads
UNF 5/8-18 hand tap is a two-piece set of professional tools for cutting internal threads to the Unified National Fine – UNF standard (American unified fine thread). The set consists of HSS roughing and finishing taps manufactured in accordance with DIN 2181.
Technical features of the UNF 5/8-18 tap
- Class 2B tolerance – provides a proper fit with class 2A screws and optimal assembly clearance
- Diameter of 5/8 inch (15.88 mm) – a large size designed for connections carrying high loads
- 18 threads per inch – the fine thread profile guarantees leak tightness and resistance to loosening under vibration
- Two-stage tapping – the roughing tap cuts the profile, and the finishing tap brings it to its final size
- HSS high-speed steel – efficient machining of steel, aluminum, and brass up to 800 MPa
The UNF 5/8-18 thread is used in hydraulic power systems, industrial pneumatics, and precision adjustment mechanisms that require vibration resistance. The UNF 5/8-18 fine thread tap is the choice of professionals servicing American construction machinery and mobile hydraulic systems.
Frequently asked questions
Calculate the hole diameter using the formula: d = D - P. For UNF 5/8-18: d = 15.88 mm - 1.41 mm = 14.47 mm. Use a 14.5 mm drill bit before tapping.
Both threads have a diameter of 5/8 inch (15.88 mm), but different pitches. UNF 5/8-18 has 18 threads per inch, while UNC 5/8-11 has only 11 threads per inch. The UNF thread is finer and provides better sealing.
You need a caliper and a thread pitch gauge. External thread (on a shaft): measure the outside diameter; it should be 15.88 mm (5/8 in). Internal thread (in a hole): measure the hole diameter; it should be approximately 14.5 mm. Then place the thread pitch gauge against the threads; the 18 TPI leaf fits this thread. The 60° thread angle confirms the American standard.
Product accessories
HSSE 14.5 cobalt metal drill bit DIN 338
Reference: 13337 In stock > 10 items
€11.05
€13.59 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.