Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
DIAMETER Ø10 mm
LENGTH 125 mm
INSERT TCMT 1104rr
ANGLE κr °
Technical specifications of the S10 STWCR 11 boring bar
| Technical Data | |
|---|---|
| ISO designation | S10 STWCR 11 |
| Shank diameter (d) | Ø10 mm |
| Effective height (h) | 9 mm |
| Overall length (L) | 125 mm |
| Functional overhang (f) | 25 mm |
| Min. bore diameter (D_min) | Ø14 mm |
| Entering angle (κr) | ° |
| Clearance angle | 7° (pos.) |
| Clamping system | ISO — center screw (S) |
| Insert type | TCMT 1104rr |
| Cutting direction | R — right-hand |
| Shank material | Steel (S) |
| Manufacturer | Varel |
S10 STWCR 11 boring bar – for internal turning and bore finishing
Precision internal turning tool for machining bores from Ø14 mm
Boring bar S10 STWCR 11 is a professional boring bar designed for longitudinal turning and bore finishing with diameters from 14 mm. The round steel shank with a diameter of Ø10 mm and a length of 125 mm ensures cutting stability even at greater tool overhangs. The geometry with an entering angle of ° enables efficient material removal.
The central screw clamping system (S) ensures the highest cutting edge positioning repeatability and easy replacement of the TCMT 1104rr insert. The positive geometry of the 60° triangular insert with 3 cutting edges is suitable for finishing, providing low cutting forces and a smooth machined surface. The boring bar is compatible with TCMT 11 inserts in various carbide grades — select the grade to match the workpiece material.
Typical applications of the S10 STWCR 11 boring bar
Cutting operations:
| ▸ | Longitudinal boring — enlarging and finishing cylindrical bores from Ø14 mm |
| ▸ | Bore finishing — positive TCMT geometry provides low cutting forces and a smooth surface |
| ▸ | Internal taper turning — bearing seats, internal chamfers, Morse tapers |
| ▸ | Light facing — the ° angle allows facing inside the bore |
| ▸ | CNC production runs — repeatable cutting edge positioning and quick insert replacement in the holder |
Included
Package contents for S10 STWCR 11
Package contents:
| ✓ | Boring bar body S10 STWCR 11 | 1 pcs |
| ✓ | Center screw for clamping the insert | 1 pcs |
| ✓ | Hex key for insert replacement | 1 pcs |
| ✗ | TCMT 1104rr cutting insert (sold separately) | — |
Compatible TCMT 1104rr insert
TCMT 1104rr
The cutting insert is not included in the set — must be purchased separately. TCMT insert. Positive geometry means that the insert is single-sided and has 3 cutting edges, providing low cutting forces and good surface quality.
Select the insert grade to match the workpiece material: P (structural steels), M (stainless steel), K (cast iron), N (aluminum). You can find compatible inserts in the section "Related products" below.
Insert installation and replacement for the S10 STWCR 11 boring bar
Instructions for the center screw clamping system (S)
Insert replacement procedure step by step
1 Unscrew the screw
Unscrew the center screw 2-3 turns
2 Clean the insert seat
Remove chips and debris
3 Install the insert
Position in the seat
4 Tighten the screw
Torque 1.0–2.0 Nm
Important: Do not exceed the recommended tightening torque — this may damage the thread in the seat or crack the insert.
Checks before starting work:
| ▸ | Tool overhang — do not exceed 4×d (40 mm) without support; use vibration damping for greater overhang |
| ▸ | Cutting edge height — set the cutting edge at spindle center height (±0.05 mm) |
| ▸ | Insert seat condition — check that the contact surface is not damaged or worn |
| ▸ | Secure clamping — the insert must have no play in the seat |
| ▸ | Indexing — when an edge wears out, rotate the insert to a fresh edge (3 edges in total) |
Note: Use internal coolant (through the spindle) for boring whenever possible. When machining without coolant, reduce cutting parameters by 20–30%. Long tool overhang promotes vibration — if vibration occurs, reduce the depth of cut and increase the feed.
Frequently asked questions — S10 STWCR 11
The minimum bore diameter is Ø14 mm. In smaller bores, the tool head interferes with the machined wall, preventing proper cutting.
For a steel shank of Ø10 mm, the recommended maximum overhang without damping is 4×d, or 40 mm. Above this value, vibration may occur — reduce the depth of cut or use a vibration-damped boring bar.
The TCMT insert has positive geometry (clearance angle 7°), which means that it is single-sided with 3 cutting edges. When one edge wears out, rotate the insert to a fresh edge.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.