Net price: €55.26
Description
Concave form cutter NFRk DIN 6518 — dimensions, material and tool specifications
Concave corner rounding cutter R12.5 mm type NFRk made of high-speed steel (HSS) HSS (hardness 64 HRC) conforming to the standard DIN 6518. The cutting diameter Ø41 mm and 6 cutting edges ensure high cutting efficiency when machining large quarter-round profiles. The Weldon straight shank Ø25 mm transmits the substantial cutting torques encountered during form milling with a large-diameter tool.
| TECHNICAL DATA | |
|---|---|
| Cutter type | Concave quarter-round 12.5 mm DIN 6518 |
| Radius R | 12.5 mm |
| Cutter diameter | Ø41 mm |
| Diameter D1 | 16 mm |
| Overall length L | 100 mm |
| Shank length I | 56 mm |
| Shank diameter d | Ø25 mm |
| Number of cutting edges Z | 6 |
| Material | HSS (high-speed steel) |
| Standard | DIN 6518 |
| Shank type | Weldon straight shank |
Workpiece materials and compatibility by ISO material group
The R12.5 mm HSS concave quarter-round radius cutter is a tool for machining the largest quarter-round edges in the standard DIN 6518 range. The radius R12.5 mm is used on the edges of heavy steel structural components, metallurgical machinery frames, turbine housings and large workpieces. The 6-flute design (unlike smaller sizes with 4 cutting edges) provides higher productivity and a better surface finish when machining such a large profile.
| Mat. group | Material | Vc [m/min] | fz [mm/tooth] | n [rpm] | F [mm/min] |
|---|---|---|---|---|---|
| P 1.1 | Structural steel ≤500 N/mm² | 28 | 0.076 | 217 | 99 |
| P 1.5 | Alloy steel 850–1000 N/mm² | 16 | 0.076 | 124 | 57 |
| M 2.1 | Austenitic stainless steel | 18 | 0.068 | 140 | 57 |
| M 2.3 | Martensitic stainless steel | 12 | 0.064 | 93 | 36 |
| K 3.1 | Gray cast iron | 22 | 0.108 | 171 | 111 |
| K 3.3 | Ductile cast iron | 28 | 0.108 | 217 | 141 |
| N 6.2 | Brass, bronze | 28 | 0.076 | 217 | 99 |
| N 7.1 | Aluminum — Al-Si alloys | 80 | 0.072 | 621 | 268 |
| N 7.2 | Pure aluminum | 200 | 0.088 | 1553 | 820 |
| S 8.1 | Thermoplastics | 96 | 0.072 | 745 | 322 |
For profile milling with a corner rounding cutter, use down milling (climb milling) for a better surface finish. For soft materials (Al, Cu), use higher cutting speeds and lower feed per tooth to avoid built-up edge (BUE).
hardness 64 HRC
profile R12.5 mm
clamping Ø25
standard DIN 6518
The R12.5 mm HSS cutter to DIN 6518 is designed to machine structural and unalloyed steels (groups 1.1–1.8), stainless steels (2.1–2.3), gray and ductile cast iron (3.1–3.5), copper and bronze alloys (6.1–6.4), aluminum (7.1–7.4) and thermoplastics (8.1–8.3). The HSS cutter is not recommended for steels hardened above 45 HRC.
The R12.5 mm concave quarter-round radius cutter (NFRk) creates a convex rounded edge with a radius of 12.5 mm on the workpiece. The convex radius cutter (NFRx) with the same radius cuts a concave profile in the material. Both types are covered by DIN 6518. The R12.5 mm cutter features a 6-flute design that increases productivity compared with smaller sizes.
For a cutter with a Ø25 mm Weldon shank, the optimal solution is a collet chuck ER40 (clamping range 3–26 mm) with an ER collet matching the shank diameter. ER collet chucks provide concentric clamping with radial runout below 0.01 mm, resulting in a better surface finish during profile milling. The ER collet distributes clamping force evenly around the entire shank circumference, eliminating the risk of tool deformation.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.