Machine Tap M24x1.5 DIN 374/35 C HSSE

Technical data of torsion machine threader M24x1,5

- nominal diameter d1 - M24x1,5

- thread pitch P - 1,5 mm,

- total length l1 - 140 mm,

- length of the working part l2 - 20 mm,

- diameter of the shank part d2 - 18 mm,

- size of the square driver - 14,5 mm,

- diameter of the threaded hole - 22,5 mm

- cut C - (2÷3) P

Machine tapping M24x1,5 for blind holes for stainless steel

Professional M24x1.5 torsion machine t apping threader for blind holes with a short nut (2-3 coil) - has torsion chip grooves with a through shank, designed for cutting machine threads of fine threads, type M24x1.5. Taps are made in accordance with DIN 274, have helical chip grooves, angle 60 degrees, type of nut C (2-3 P) - for blind and through holes in materials with a short chip. The tolerance class of the threads made is ISO2-6H. The taps are made of modern HSSE high-speed steel with the addition of cobalt (about 5%). This unique composition of the steel contributes to the higher wear resistance of the taps, and thus to a longer service life. M24x1.5 torsion machine taps made of cobalt steel are resistant both to high temperatures arising during high-speed threading and to other mechanical damage (breaking, cracking, chipping). The manufacturer of our threading dies is the well-known Czech company Narex. It is a brand known all over the world and valued for its high-quality tools. They are distinguished by the possibility of high-performance and high-precision cutting, which is especially important for professional machining of hard and hard-to-machine materials.