Machine Tap M14X1 ISO 529/35 C HSSE Fra

Technical data of torsion machine threader M14x1

- nominal diameter d1 - M14x1

- blade twist angle - 35 degrees

- thread pitch P - 1 mm,

- total length l1 - 87 mm,

- length of the working part l2 - 22 mm,

- diameter of the shank part d2 - 11,2 mm,

- size of the square driver a - 9,0 mm,

- diameter of the threaded hole - 13,0 mm

- c- (2÷3) P-heading

Machine tapping M14x1 for stainless steel

Profesjonalny gwintownik maszynowy M14x1 skrętny nieprzelotowy o krótkim nakroju (2-3 zwój) - posiada rowki wiórowe skrętne z chwytem przelotowym, do nacinania gwintów metrycznych drobnozwojnych, typ M 14x1, zgodny z normą DIN 374. Posiada nakrój C (2-3 P), rowki wiórowe śrubowe, klasa tolerancji wykonanych gwintów 6H. M14x1 fine torsion machine taps offered to you in our store are made of modern HSSE high-speed steel, the essential component of which is cobalt in an amount of about 5%. This unique element significantly increases the cutting properties of taps. First of all, they are characterized by greater hardness, durability and wear resistance even at very high temperatures - up to 670 degrees C. They provide high-performance machining - at high speeds, without compromising the very good accuracy of the threads being cut. They can be used for cutting hard and hard-to-machine materials such as alloy steels, stainless steel, acid-resistant steel, heat-resistant steel, cast steel, cast iron, non-ferrous metals. The blades of the taps are resistant to mechanical damage, which significantly extends the life of the tools.