Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of M4x0,5 hand tapping machine
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M4 |
| Thread pitch P mm | 0,5 mm |
| Overall length l1 | 45 mm |
| Length of working part l2 | 10 mm |
| Diameter of the shank part d2 | 4 mm |
| Size of square drive a | 3,1 mm |
| Threaded bore diameter | 3.5 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M4x0.5 fine thread hand taps
Hand Tap M4x0.5 ISO 529/2 6H HSS is used for making an internal M4 metric joint with a pitch of zero comma five millimeters in structural steels with strengths up to eight hundred mega pascals; a two-piece work sequence carried out without load jumps promotes the maintenance of a six H class fit.
Performance parameters: nominal diameter four millimeters; pitch zero comma five millimeters; outline sixty degrees according to ISO 68-1; bore tolerance field class six H according to ISO 965; right-hand design; straight chip grooves for predictable evacuation. Routing according to ISO 529/2 - introductory member and finishing member - distributes torsional loads and promotes alignment; in the practice of bench preparation, the order of selection and sequence of transitions is facilitated by Set Taps Manual M4 x0.5. Working material: high speed steel in precision grinding. Recommended drill under the thread: three and a half millimeter; lubrication with emulsion or active oil improves the surface quality of the bottom of the coil.
- Uniform profile shaping - separation into an introductory and final stage dampens torque fluctuations and reduces chafing in the full outline.
- Cutting edge durability - ground high-speed steel maintains low micro roughness and slows abrasion.
- Accuracy in the six H field - effective diameter control promotes a positive pass/fail result.
- Process order - clear I/II member markings facilitate identification and speed up dimensional inspection.
Conforming to ISO 529 (field six H) ensures interoperability with measurement equipment, a set of M4x0.5 hand taps maintains stable thread outline and repeatable dimensions in short runs and unit runs.
M4x0.5 thread cutting stages in 2-piece set: ripper and finisher
Frequently asked questions
1. What does the M4x0.5 set contain?
The set consists of two thread cutters - a peeler and a finisher, which, when used consecutively, guarantee full thread formation.
2. What materials is the M4x0,5 tapping tool designed for?
The HSS tool works well in machining low-carbon steel, aluminum, brass and other materials with good machinability.
3. What are the advantages of being made of HSS?
HSS high-speed steel provides high durability, wear resistance and stable operation even in demanding conditions.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
