Hand Tap M16 LH DIN 352/3 6H HSS

Technical data of M16 left hand threader

- thread diameter d1 - M16

- thread pitch P - 2 mm

- total length l1 - 97 mm

- length of working part l2 - 28 mm

- diameter of grip part d2 - 12,5 mm

- length of the side of the square driver a - 10 mm

- thread hole - 14.0 mm

Hand tapping tool M16 left

Hand tapsM16 left x2 HSS. High-quality set of three professional taps for general use The offered tools are designed for cutting ordinary metric ISO DIN-13, LH (left-hand) threads, with an angle of 60 degrees, type M, diameter 16. Threading is done manually using a special knob. A complete thread is formed in three successive passes and the use of successive tapping tools (pre-cutter with 8P, ripper with 4P and finisher with 2P). The tools are produced by the well-known Polish company Fanar, which has been in business continuously for more than 60 years.

Extensive experience and successive implementation of modern technologies in the production of tools, results in offering high-end tools, significantly distinguished from those of other brands. The M16 left hand threaders we offer are made of modern tool steel HSS - High Speed Steel, according to the standard marked DIN 352. Thanks to this steel, the threaders allow to achieve high cutting performance and high precision of the threads cut and at the same time increase the resistance of the blades to possible damage during machining.