Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data for the UNC No 10-24 hand tap
| Technical data | ||
|---|---|---|
| Nominal Diameter d1 Inches/mm/Decimal | UNC No 10-24 | |
| Thread Pitch P in Inches and mm | 24 threads per inch | 1.06 mm |
| Thread Diameter d1 mm / Decimal | 4.83 mm / 0.1900 in | |
| Thread angle G | 60° | |
| Thread Standard | UNC ANSI B-1.1 | |
| Overall Length l1 | 58 mm | |
| Flute Length l2 | 16 mm | |
| Shank Diameter d2 | 5 mm | |
| Square Drive Width Across Flats a | 4 mm | |
| Tap Drill Hole | 3.8 mm | |
Roughing, intermediate, and finishing taps – how much material each removes
Division of work in the 1–2–3 set
The UNC No 10-24 thread is formed in the wall of a 3.8 mm diameter hole. The thread groove extends 0.515 mm into the wall. A single tap would have to cut the entire groove at once – by hand, this creates high resistance and a risk of breakage. The set divides this work into three layers.
The drawing shows the entire set in operation. All three taps have the same shank and the same length. They differ in chamfer length: No. 1 has a taper spanning 7–10 threads, while No. 3 spans only 1–2 threads. The detail views at the hole wall show how the thread groove deepens after each tap.
| Tap | Chamfer | Material removed | How it works in the hole |
|---|---|---|---|
| No. 1 – roughing tap | long, 7–10 threads | approx. 60% | enters smoothly and establishes thread alignment |
| No. 2 – intermediate | medium, 3–5 threads | approx. 30% | screws into the previously cut threads and starts cutting only deeper in the hole |
| No. 3 – finishing tap | short, 1–2 threads | approx. 10% + sizing | turns easily and produces the full 2B profile |
How to identify the tap numbers in the set
The chamfer is the tapered end of the tap. No. 1 has the longest chamfer and No. 3 the shortest – the difference is immediately visible when they are placed side by side. No. 1 and No. 2 have shallower thread profiles; only No. 3 has the full profile. The number can also be identified on the shank: No. 1 has one ring, No. 2 has two, and No. 3 has none. Keep the set together and always start with the roughing tap.
How to tap a UNC No 10-24 hole – sequence 1, 2, 3
Hand tapping step by step
Thread UNC No 10-24 in five steps
ØDrilling
Drill bit 3.8 mm
1Roughing tap
Removes approx. 60%
2Intermediate
Removes approx. 30%
3Finishing tap
Removes approx. 10%
✓Finished thread
Tolerance 2B
Turning sequence: half a turn clockwise, a quarter turn counterclockwise | Between taps: remove chips from the hole
Start with the hole. For inch threads, pitch is specified in threads per inch, so first convert it to millimeters: an inch is 25.4 mm, and 25.4 ÷ 24 threads ≈ 1.06 mm. The UNC No 10-24 thread diameter is 0.190 inches, or 4.83 mm. Subtracting the 1.06 mm pitch from the 4.83 mm diameter gives 3.77 mm – in practice, use a 3.8 mm drill bit. An undersized hole is a common cause of taps twisting off in the material.
Through hole or blind hole – how deep to drill
The set taps both types of holes. In a through hole, the thread extends through the full material thickness. In a blind hole, cut the thread to 7.2 mm, or 1.5 times the thread diameter (1.5 x 4.83 mm, shown as 1.5D in the drawing). Drill the hole deeper than the thread. The clearance below the thread accommodates chips and the finishing tap chamfer.
No. 1 – the roughing tap establishes thread alignment
Fit the roughing tap in the tap wrench and position it perpendicular to the surface. Check the angle from two sides, for example with a square. Turn half a turn clockwise, then a quarter turn counterclockwise. Reversing breaks the chip into short pieces – a slight crunch is normal. The first threads determine whether the thread will be straight.
No. 2 and No. 3 – deepening and full profile
Unscrew the roughing tap and remove the chips from the hole. Screw the intermediate tap into the cut threads by hand – it should engage them on its own. It turns easily at first and only starts cutting deeper in the hole. The finishing tap enters with almost no resistance and cuts the final portion of the profile only at the end. When it screws in smoothly all the way, the thread is complete – check it with a UNC No 10-24 screw.
UNC No 10-24 hand tap – set of 3 taps for American numbered thread sizes
UNC No 10-24 hand tap is a three-piece set of tools designed to produce internal threads to the Unified National Coarse – UNC standard. The set includes HSS roughing, intermediate, and finishing taps and complies with DIN 352.
UNC No 10-24 tap features
- Class 2B tolerance – general-purpose accuracy for joints in electronics and mechanical applications
- Diameter No 10 (4.83 mm) – common numbered size in American equipment
- 24 threads per inch (1.06 mm pitch) – UNC series coarse thread profile for this size
- Set of three taps – progressive cutting ensures tool durability
- HSS high-speed steel – effective machining of steels, aluminum, and plastics up to 800 MPa
The UNC No 10-24 thread is found in American-made computers, networking devices, electronic enclosures, and office equipment. UNC No 10-24 numbered-size tap is an essential tool for IT service centers and workshops repairing electronics imported from the USA.
Frequently asked questions
Calculate the hole size using the formula: d = D - P. For UNC No 10-24: d = 4.83 mm - 1.06 mm = 3.77 mm. Use a 3.8 mm drill bit before tapping.
UNC No 10-24 is found in computer cases (mounting disks and drives), server cabinets, audio-video equipment, and electronic devices imported from the USA. It is a standard size in the IT industry.
You need a caliper and a thread pitch gauge. External thread (on a shaft): measure the major diameter – it should be 4.83 mm (No 10). Internal thread (in a hole): measure the hole diameter – it should be approximately 3.8 mm. Then place the thread pitch gauge against the threads – the 24 TPI leaf fits this thread. The 60° thread angle confirms the American standard.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.