Machine Tap M32x1.5 DIN 374 C HSSE

Technical data of the machine threader M32x1,5

- nominal diameter d1 - M32x1,5

- thread pitch P - 1,5 mm,

- total length l1 - 150 mm,

- length of the working part l2 - 27 mm,

- diameter of the shank part d2 - 22 mm,

- size of the square driver - 18,0 mm,

- thread hole diameter - 30,5 mm

- cut C - (2÷3) P

Machine tapping M32x1.5 for stainless steel

Machine tappingmachine M32x1.5 blind through straight with a short thread cap (2-3 coil) - has straight chip grooves in which chips collect during threading. This tapping machine does not lead the chips either up or down the hole.