Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of M5x0,5 hand tapping machine
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M5 |
| Thread pitch P mm | 0,5 mm |
| Overall length l1 | 50 mm |
| Length of working part l2 | 12 mm |
| Diameter of the shank part d2 | 6 mm |
| Size of square drive a | 4,9 mm |
| Threaded bore diameter | 4.5 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M5x0.5 fine thread hand taps
Hand Tap M5x0.5 DIN 2181/2 6H HSS is used in the precise production of fine metric threads with a diameter of five millimeters and a pitch of half a millimeter. Already at the stage of preparing the operation, the M5x0.5 Hand Thread Set is important, which facilitates the maintenance of the sequence of passes and axial stability in the machining of structural steels up to the strength of eight hundred megapascals.
Geometric and performance data: nominal diameter five millimeters; stroke 0.5 mm; metric 60-degree outline according to ISO 68-1; bore tolerance 6H according to ISO 965; right-hand design; straight chip grooves to promote controlled chip evacuation. Material: HSS high-speed steel, ground version, resistant to micro-crushing and providing longer edge life. A two-part layout according to DIN 2181/2 - introduction (I) and finishing (II) - balances torsional torque and promotes profile uniformity. Recommended drill bit: 4.5 mm; emulsion or active oil cooling improves surface quality.
- Dimensional repeatability - tolerance class 6H allows positive control with "pass/fail" checks.
- Stable guidance - Set Taps M5x0.5 handpieces allow the correct phase sequence to be maintained and reduce the risk of errors.
- Tool life - ground high-speed steel delays wear and maintains edge sharpness.
- Smooth machining - the two-part layout reduces torque fluctuations and facilitates uniform coil forming.
Reference to DIN 2181/2, ISO 68-1 and ISO 965 guarantees compatibility with measuring instruments and predictability of the results obtained in both unit and short-run production.
M5x0.5 thread cutting stages in a 2-piece set: ripper and finisher
Frequently asked questions
1. What does the M5x0.5 set contain?
The set consists of two thread cutters - a peeler and a finisher, which, when used consecutively, guarantee full thread formation.
2. Is the M5x0.5 DIN 2181 thread cutter suitable for blind holes?
Yes, the set can be used for both through-holes and blind holes, according to DIN 2181 and class 6H.
3. What are the advantages of being made of HSS?
HSS high-speed steel provides high durability, wear resistance and stable operation even under demanding conditions.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
