Convex milling cutter R1.6 DIN 856 HSS

Technical data of radial convex milling cutter R1,6

- radius of the milling cutter R1 ,6 mm,

- working diameter D - 50 mm,

- bore diameter d - 16 mm,

- width of milling cutter L - 3,2 mm

- number of teeth Z - 14

Convex milling cutter semicircular R1,6

High-end radius milling cutter convex R1,6 mounted disc milling cutter, type NFRa - with a radius of R=1,6 mm, designed to perform internal radii. The cutter is recommended for high-performance and at the same time very accurate machining. It is a semi-circular concave milling cutter, made in accordance with the dimensional standard DIN 856. The circular milling cutters offered in our store are produced in the highest quality class with a view to very demanding customers. The advantage of our milling cutters is increased resistance to heavy cutting conditions and also resistance to abrasion under the influence of high temperature - reaching up to 600 degrees C. Radius milling cutters convex R1,6 from our store are produced from modern HSS (High Speed Steel). This is a high-alloy tool steel with high toughness, impact strength and also with above-average hardness. HSS cutters are recommended for high-performance, high-volume machining.