Carbide insert for thread 14 I 1 ISO HTF Horn

Technical data of milling insert 14 pitch 1 mm

- pitch of thread - 1.0 mm

- insert for milling of internal threads,

- insert size A - 14 mm

- insert height H - 7.5 mm

- insert thickness T - 3.1 mm

- thread outline - ISO metric

- hTF grade - is a universal grade suitable for almost any kind of material

Carbide insert for thread milling from Horn designed for folding toolholders.

Cutting parameters of the insert for thread milling 14 mm pitch 1 mm internal

Recommended feed rate: 0.05 - 0.15 mm/tooth

Advantages of using inserts for thread milling:

- the same holders and inserts can produce right-hand, left-hand threads and can mill the same thread in multiple sizes,

- the thread starts with a full coil, that is, the thread can be cut all the way to the bottom of the hole,

- low loads during thread milling, so threads can be milled on small machines.