Drill 9.5 NWKc HSS DIN 345 Baildon

Technical data of drill fi 9.5 mm for metal

- diameter d - 9.5 mm,

- total length l1- 162,0 mm,

- length of the working part l2 - 81,0 mm,

- morse taper - MK1

Drill 9,5 mm on Morse taper with fin

Drill fi 9.5 mm with Morse taper shank for steel, NWKc, complies with the dimensional standard DIN 345, manufactured from HSS high speed steel. It has a Morse taper shank, strong cutting edges resistant to impact and lateral forces, and spiral grooves to increase the efficiency of chip removal from the drilled hole. The drill bit is suitable for drilling through-holes and blind holes in materials classified as P1.2 - P1.3. Drill 9.5 HSS is suitable for drilling in metal, unalloyed steel, plastics and metal alloys. It is designed for multi-batch processing in large production plants, as well as for amateur drilling. The drills offered in our store are distinguished by their greater hardness and durability. They are resistant to abrasion under the influence of high temperatures, as well as to other mechanical damage caused during drilling in harsh conditions.