Hand Tap M6x0.5 DIN 2181/2 6H HSS

Technical data of the hand tapping machine M6x0,5

- thread diameter d1 - M6 mm

- thread pitch P - 0,5 mm

- total length l1 - 56 mm

- length of working part l2 - 16 mm

- length l3 - 27 mm

- diameter of grip part d2 - 6 mm

- length of the side of the square driver a - 4,9 mm

- thread hole - 5.5 mm

Hand taps M6x0,5 fine threads

Hand tapsM6x0,5 fine-coil HSS for complete cutting of threads with an angle of 60 degrees, ISO DIN-13. They are suitable for threading through-holes and blind holes. They are manufactured by the Polish company Fanar. The products of this brand are known and appreciated by specialists of almost all industries around the world. They are characterized by high machining efficiency and at the same time a very long service life. The offered M6x0,5 hand taps are made according to the standard marked DIN 2181 from a special high-speed tool steel HSS - High Speed Steel.

This is a modern material, which significantly increases the efficiency of threading and allows to achieve high precision of cut threads. The advantage of M6x0,5 hand taps is also the high resistance of the blades to possible damage during threading, and, above all, resistance to breaking, cracking, blunting and chipping. These properties allow machining hard materials marked with the symbol P1.2 - P1.3. These are metals, non-ferrous metals, carbon steels (unalloyed), non-ferrous metal alloys o hard plastics.