Hand Tap M12x0.75 DIN 2181/2 6H HSS

Technical data of the hand tapping machine M12x0,75

- thread diameter d1 - 12 mm

- thread pitch P - 0,75 mm

- total length l1 - 70 mm

- length of working part l2 - 22 mm

- diameter of grip part d2 - 9 mm

- length of the side of the square driver a - 7.0 mm

- thread hole - 11.25 mm

Hand taps M12x0,75 fine threads

Hand tapsM12x0,75 fine-coil HSS. a 2-piece set of professional threaders for making metric fine-coil threads M 12 x 0,75. They are designed for threading through-holes and blind holes, ISO DIN-13, with an angle of 60 degrees. The offered set includes M12x0,75 hand threaders for two consecutive working steps. These are: a ripper with an 8P nut and a finishing threader a 2P nut. The tools are made by the well-known Serbian company FRA. This is a brand famous for the high quality of its products, which are used in almost all industries around the world. The M12x0.75 hand taps we offer are manufactured from special high-speed tool steel HSS - High Speed Steel. This is a modern high speed steel, which causes a significant increase in the accuracy of threading, increases the efficiency of work, and at the same time allows the threader blade to maintain high resistance to possible damage. Thanks to HSS steel, the threaders are suitable for machining very hard materials of the P1.2 - P1.3 category, including but not limited to unalloyed (carbon) steels, metals, non-ferrous metals and their alloys (copper, aluminum, bronze, brass) and hard plastics. The taps are of high quality and are made according to DIN 2181.