copy of Hand Tap M5 DIN 352/3 6H HSS Varel

Technical data of the hand tapping machine M5

- thread diameter d1 - M5

- thread pitch P - 0,8 mm

- total length l1 - 50 mm

- length of working part l2 - 14 mm

- length l3 - 24 mm

- diameter of grip part d2 - 6 mm

- length of the side of the square driver a - 4,9 mm

- thread hole - 4.2 mm

Hand taps M5 3 pieces

Hand tapsM5 x0,8 HSS - a set of three professional taps of the well-known Polish brandFanar . This is an internationally respected brand, whose products are distinguished by high quality workmanship. The set of the offered tools includes 3 threaders: preliminary threader with an 8P cut, proper threader with a 4P cut and finishing threader with a 2P cut.

They are used for cutting M5, ISO DIN 13, metric ordinary threads with a tolerance of 6H and an angle of 60 degrees. M5 hand taps are made of special high-alloy HSS. This is a modern material that causes increased machining efficiency and at the same time very high cutting precision. Also noteworthy is the fact that high speed steel significantly increases the strength of taps to withstand tough machining conditions. Even when cutting very hard and hard-to-machine materials, the blades of the thread cutters are resistant to possible damage (breaking, cracking, dulling). The tools comply with DIN 352 and can be counted among the most efficient in their class.