Deutsch check 
- 98% zadwolonych klientów
- Dostawa 24h
- 30 dni na zwrot
Beschreibung
Technical data of conical reamer 50 1:50
- working diameter D - 50 mm
- diameter of the shank part d - 50 mm
- length l1 - 15 mm
- length of working part l - 360 mm
- total length L - 460 mm
- number of teeth Z - 11
- taper angle 1:50 - 1.146 degrees
Manual conical reamer for metal 50
Conical handreamer 50 finisher for conical holes with taper angle 1:50
High-quality conical hand reamer 50 NRSk, size (diameter) D 50 mm, in accordance with the dimensional standard DIN 9. It is a finishing reamer recommended for very fine machining, after first drilling a hole with a drill. It is suitable for machining tapered holes with a convergence of 1:50. The reamer is designed for manual machining with a suitable knob. Hand reamers offered in our store, are manufactured by a Polish manufacturer, are characterized by increased strength to withstand harsh cutting conditions. They are made entirely of modern HSS high-speed steel. This is a special high-alloy steel, the properties of which are much higher than those of conventional tool steel. HSS conical 50 hand reamers are suitable for finishing, adjusting hole size, roughness and tolerance to pre-set parameters. The reamers are characterized by their extended service life.
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Angesehene Artikel
NFMd M 14/20 worm milling cutter H-4385 "B"
776,84 € brutto
Nur noch wenige Teile verfügbar
Instant Shipping
