Deutsch check 
- 98% zadwolonych klientów
- Dostawa 24h
- 30 dni na zwrot
Beschreibung
Technical data of burr 6 two-point burr for stainless steel
- diameter of the working part D - 6 mm,
- diameter of the shank part d - 6.0 mm,
- length of the working part l - 8.0 mm,
- length of the shank part l1 - 36.0 mm,
- total length L - 52.0 mm,
- number of Z-blades - 2
Shank cutter 6 2 flute for stainless steel
End mill 6 2 flute for stainless steel for keyways, double-edged, NFPg arbor, right-hand cutting, type NFPg 6 mm, commonly called finger milling, for keyways. It is made in accordance with DIN 327 from special cobalt HSS-E high-speed steel. It has a nominal diameter of 6 mm and two central cylindrical-front blades with a 25-degree turning angle. They allow the cutter to plunge vertically into the workpiece. The milling cutter's short shank gives it maximum rigidity and the ability to perform machining that requires a short overhang. Cobalt steel HSS-E milling cutters are characterized by above-average hardness and the ability to cut very hard materials, such as alloy steels, stainless steel, acid-resistant steel, heat-resistant steel, cast steel, gray cast iron, malleable cast iron and ductile iron. The6 burrs for stainless steelin our offer are highly resistant to fracture, chipping, chipping and even rapid dulling. This makes it possible to perform high-performance machining, at increased speeds, during which high temperatures of up to 670 degrees C are generated.
Product accessories
Carbide cutter fi 6 Z-2 VHM 45 HRC
Artikel-Nr.: 0000006846 Auf Lager > 10 items
6,58 €
8,09 € brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Angesehene Artikel
