Deutsch check 
- 98% zadwolonych klientów
- Dostawa 24h
- 30 dni na zwrot
Beschreibung
Technical data of manual threader for installation pipes PG 29
- diameter of the threader - d1 - PG 29 mm,
- number of coils per inch - 1"/P - 16 coils
- thread pitch in mm - P - 1.588 mm
- long nut - 12 turns to full thread
- total length of the thread cutter - l1 - 125 mm
- length of working part - l2 - 48 mm
- diameter of the shank part - d2 - 31,5 mm
- length of the shank side - 25 mm
- diameter of the hole for tapping - 35,50 mm
Professional threaders for manual cutting of threads in installation pipes. Type of threaders NGSy, Pg-29, thread angle 80 degrees. Complete thread cutting is carried out in two consecutive working steps, manually with the help of special knobs . The Pg threaders offered in our store were manufactured in accordance with the dimensional standard DIN 40432 from modern HSS (High Speed Steel). The properties of this steel contribute to the higher strength of the threaders to heavy cutting conditions also their greater hardness and durability. Their advantage is also increased resistance to any mechanical damage to the blades, and thus allow extended tool life. They are suitable for machining unalloyed steels, metals, copper, aluminum and their alloys.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Angesehene Artikel
