Deutsch check 
- 98% zadwolonych klientów
- Dostawa 24h
- 30 dni na zwrot
Beschreibung
Technical data of the hand tapping machine M33
- thread diameter d1 - M33
- thread pitch P - 3,5 mm
- total length l1 - 151 mm
- length of working part l2 - 51 mm
- diameter of grip part d2 - 22,4 mm
- length of the side of the square driver a - 18 mm
- thread hole - 29.5 mm
Hand taps M33 3 pieces
Hand taps M33 x3,5 HSS - a set of professional sharpened general-purpose taps for cutting ordinary metric threads M33, with an angle of 60 degrees, ISO DIN-13. They can be used for cutting threads in through-holes and blind holes. Threads are made in three working steps during the successive use of individual threaders from the set. It consists of tapping tool No. 1 - pre-cutter (8P nut), tapping tool No. 2 - ripper (4P nut) and tapping tool No. 3 - finisher nut (2P). The allowance of material corresponding to the cross-section of the groove is divided appropriately between all the taps used. M33 hand taps are made according to ISO 529 from high-alloy modern HSS. The properties of this steel greatly increase the applicability of the tapping tool. It is suitable for cutting threads in metals, unalloyed steels, nonferrous metals and their alloys, as well as plastics. The tolerance field of the threads made is 6H.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Gwintownik Ręczny M33 LH DIN 352/3 6H HSS
139,18 € brutto
Nur noch wenige Teile verfügbar
Instant Shipping
Angesehene Artikel
